Snapper SPV21675FC, SPV21675EFC specifications Storage Procedure, Wheel Drive Components

Page 12

Maintenance

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

Wheel Drive Components

1.Remove the rear cover. Refer to the Section entitled “Rear Cover Removal & Installation”.

2.Clean any debris buildup on or around the transmission, axles, idler, pulleys, belt, etc., as well as on the inside of the cover. Check components for wear or damage.

Replace worn or damaged components immediately.

3.Replace the rear cover.

Important: DO NOT operate the mower without the rear cover securely in place.

Storage Procedure

Refer to the Engine Owner’s Manual for directions regarding engine storage preparations. Prepare the mower for “end of season” storage as follows:

1.Drain the fuel from the fuel tank and let the engine run until all fuel is out of the carburetor.

2.Disconnect and remove the spark plug wire away from the spark plug before any other preparations are made!

3.Tape all openings closed to prevent spraying water into the exhaust or air intakes during washing.

4.Tilt the mower up on its rear wheels and thoroughly clean the underside of the deck. Do not tilt the mower with the spark plug or carburetor down. Scrape away any accumulation of grass with a putty knife and/or wire brush.

5.Lubricate all exposed metal with a light coating of oil to prevent corrosion.

6.Carefully fold the handles, “flexing” the control cables to prevent cable damage.

7.Store the mower in a shed or other dry area, protected from weather.

10

www.snapper.com

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Variable Speed Rear Discharge Walk Behind Mowers Product Registration Date of Purchase Retailer Retailers Phone Number EquipmentEngine Table of Contents Protection for Children Slope OperationPreparation From Previous ColumnMaintenance and Storage OperationFeatures and Controls Pre-Start Check List Starting and OperationEngine and Blade Handle Height Adjustment StoppingPropelling the Mower Cutting Height Adjustment Installing the Discharge DeflectorRecycling Operation Installing the Grass Bag Removing the Recycling PlugMaintenance Introduction Service After First 5 HoursService Periodic Storage Procedure Wheel Drive ComponentsMower Blade Replacement Standard Blade Wear LimitBlade Sharpening Wheel Drive Control Adjustment Wheel drive controls Components removed for clarityBelt Service Engine Drive Belt ReplacementBattery Service Rear Cover Removal and Installation To Install the Rear CoverTo Remove the Rear Cover Service Schedule Maintenance/Replacement PartsTroubleshooting Probable Cause Corrective ActionYear Limited Warranty Disclaimer of WarrantyPage Page Page Common Service Parts Part Number

SPV21675FC, SPV21675EFC, SPV21675EFC (7800266), SPV21675FC (7800265) specifications

The Snapper SPV21675EFC and SPV21675FC are remarkable additions to the lineup of professional-grade lawn care equipment designed for homeowners and landscapers who value efficiency and precision. These models showcase an array of innovative features and cutting-edge technologies, empowering users to maintain immaculate lawns and gardens with ease.

The SPV21675EFC and SPV21675FC are equipped with a robust 21-inch steel cutting deck, ensuring a durable and reliable performance. This size strikes a perfect balance, making it suitable for both small and medium-sized yards. The steel construction not only enhances the mower's durability but also contributes to a clean and consistent cut across various grass types.

One of the standout features of these mowers is the Smart Choke technology, which simplifies starting the engine. This user-friendly system automatically adjusts the choke position, reducing the need for manual adjustments by the operator. As a result, both novice and seasoned lawn care enthusiasts can enjoy hassle-free starts with minimal effort.

Powered by a reliable 163cc engine, the Snapper SPV21675EFC and SPV21675FC deliver impressive cutting power. This engine is designed for efficiency, providing sufficient torque to handle thick grass and uneven terrain without sacrificing performance. The mowers come with a variable speed self-propulsion system, allowing users to adjust the speed according to their comfort level and mowing conditions.

Another key characteristic is the versatile cutting height adjustment feature. With six different height positions, users can easily tailor the cutting length to suit their lawn's specific needs. This flexibility is essential for achieving the desired appearance and health of the grass.

The Snapper SPV21675 series also features an integrated rear bagging system, allowing for efficient grass collection as you mow. This system promotes a cleaner lawn by minimizing clippings left behind and reducing the need for additional raking or clean-up after mowing.

In summary, the Snapper SPV21675EFC and SPV21675FC mowers offer exceptional features, including a durable steel cutting deck, user-friendly Smart Choke technology, a powerful engine, variable speed capabilities, adjustable cutting heights, and an effective bagging system. These characteristics make them ideal choices for anyone seeking a reliable and efficient lawn care solution. Whether you're a homeowner looking to maintain your yard or a professional landscaper managing multiple properties, the Snapper SPV21675 series will undoubtedly meet and exceed expectations.
Top Page Image Contents