Snapper SPV21675EFC (7800266), SPV21675FC (7800265) Pre-Start Check List, Starting and Operation

Page 7

Pre-Start Check List

Make the following checks and perform the service required before each start-up.

1.Check the guards, deflectors, grass bag, and covers to make sure all are in place and securely tightened.

2.Check the blade control (A, Figure 1) and wheel drive control (B) to insure they work freely.

A

B

Figure 1: Mower controls

3.Check the cutting height. Adjust to the desired height. Refer to the Section ‘Cutting Height Adjustment’.

4.Check the engine oil and add oil as needed to bring the level up to the full mark (A, Figure 2). Refer to the Engine Owner’s Manual for oil specifications.

A

Figure 2: Checking engine oil

5.Add fuel to the tank after pushing the mower outside where fumes can safely dissipate. Fill the tank to 1-1/2 inches below the top of the filler neck (to allow for fuel expansion). Make sure the cap is tightened after fueling. Refer to the Engine Owners Manual for fuel specifications.

6.Clean the exterior surfaces of the cutting deck and engine of any accumulation of spilled fuel, dirt, grass, oil, etc. Keep the engine air intake screen and cooling fins clear at all times.

7.Perform battery service. Refer to the Section ‘Battery Service’.

Starting and Operation

Engine and Blade

1.Pull the blade control (A, Figure 3) against the handle.

2.Start the mower:

Manual Start Models: Pull the rope start handle (B) to crank the engine.

Electric Start Models: Insert the key (C) into the ignition switch (D), located on the right side of the handle above the rope guide. Turn the key to crank the engine.

3.After the engine starts, allow a brief warm-up until the engine runs smooth before beginning mower operation.

NOTE: To stop the engine (and blade), release the blade control.

 

A

B

Operation

 

 

D

 

C

Figure 3: Starting the mower

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Variable Speed Rear Discharge Walk Behind Mowers Date of Purchase Retailer Retailers Phone Number Equipment Product RegistrationEngine Table of Contents From Previous Column Protection for ChildrenSlope Operation PreparationOperation Maintenance and StorageFeatures and Controls Starting and Operation Pre-Start Check ListEngine and Blade Stopping Handle Height AdjustmentPropelling the Mower Installing the Discharge Deflector Cutting Height AdjustmentRecycling Operation Removing the Recycling Plug Installing the Grass BagService After First 5 Hours Maintenance IntroductionService Periodic Wheel Drive Components Storage ProcedureStandard Blade Wear Limit Mower Blade ReplacementBlade Sharpening Wheel drive controls Components removed for clarity Wheel Drive Control AdjustmentEngine Drive Belt Replacement Belt ServiceBattery Service To Install the Rear Cover Rear Cover Removal and InstallationTo Remove the Rear Cover Maintenance/Replacement Parts Service ScheduleProbable Cause Corrective Action TroubleshootingDisclaimer of Warranty Year Limited WarrantyPage Page Page Part Number Common Service Parts

SPV21675FC, SPV21675EFC, SPV21675EFC (7800266), SPV21675FC (7800265) specifications

The Snapper SPV21675EFC and SPV21675FC are remarkable additions to the lineup of professional-grade lawn care equipment designed for homeowners and landscapers who value efficiency and precision. These models showcase an array of innovative features and cutting-edge technologies, empowering users to maintain immaculate lawns and gardens with ease.

The SPV21675EFC and SPV21675FC are equipped with a robust 21-inch steel cutting deck, ensuring a durable and reliable performance. This size strikes a perfect balance, making it suitable for both small and medium-sized yards. The steel construction not only enhances the mower's durability but also contributes to a clean and consistent cut across various grass types.

One of the standout features of these mowers is the Smart Choke technology, which simplifies starting the engine. This user-friendly system automatically adjusts the choke position, reducing the need for manual adjustments by the operator. As a result, both novice and seasoned lawn care enthusiasts can enjoy hassle-free starts with minimal effort.

Powered by a reliable 163cc engine, the Snapper SPV21675EFC and SPV21675FC deliver impressive cutting power. This engine is designed for efficiency, providing sufficient torque to handle thick grass and uneven terrain without sacrificing performance. The mowers come with a variable speed self-propulsion system, allowing users to adjust the speed according to their comfort level and mowing conditions.

Another key characteristic is the versatile cutting height adjustment feature. With six different height positions, users can easily tailor the cutting length to suit their lawn's specific needs. This flexibility is essential for achieving the desired appearance and health of the grass.

The Snapper SPV21675 series also features an integrated rear bagging system, allowing for efficient grass collection as you mow. This system promotes a cleaner lawn by minimizing clippings left behind and reducing the need for additional raking or clean-up after mowing.

In summary, the Snapper SPV21675EFC and SPV21675FC mowers offer exceptional features, including a durable steel cutting deck, user-friendly Smart Choke technology, a powerful engine, variable speed capabilities, adjustable cutting heights, and an effective bagging system. These characteristics make them ideal choices for anyone seeking a reliable and efficient lawn care solution. Whether you're a homeowner looking to maintain your yard or a professional landscaper managing multiple properties, the Snapper SPV21675 series will undoubtedly meet and exceed expectations.
Top Page Image Contents