Snapper SPV21675EFC (7800266), SPV21675FC (7800265) specifications Cutting Height Adjustment

Page 9

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

Cutting Height Adjustment

1.Pull the height adjusting lever (A, Figure 6) outward, and move to the desired cutting height. The highest cutting position is Notch 9 (B; also see Figure 7). The lowest cutting position is Notch 1 (C).

Note: The lever will set all wheels to the same cutting height.

!

WARNING

!

Stop engine and mower blade by releasing the blade control before adjusting cutting height.

A

C

B

Figure 6: Adjusting cutting height

1.50 in 4.00 in

Figure 7: Cutting height settings (approximate)

Recycling Operation

Note: For best recycling results, cut up to a maximum of 1/3 of grass blade length and recycle ONLY when grass is dry.

1.Set the height adjustment lever in the highest cutting position (Notch 9). Refer to the Section entitled “Cutting Height Adjustment”.

2.Proceed mowing slowly. If the grass is very dense, lower the height adjustment lever one notch lower to improve recycling performance.

Installing the Discharge Deflector

1. Raise the recycling cover (A, Figure 8).

Important: The recycling cover should remain on the machine at all times. Do not remove.

A

D

C

B

Figure 8: Installing the discharge deflector

2.Install the deflector (B) to the deck under the recycling cover, making sure that:

The tabs (C) hook under the pivot rod (D). The locking tab on the deck (A, Figure 9) goes through the slot in the deflector (B).

3.Lower the recycling cover against the deflector.

Operation

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Variable Speed Rear Discharge Walk Behind Mowers Product Registration Date of Purchase Retailer Retailers Phone Number EquipmentEngine Table of Contents Slope Operation Protection for ChildrenPreparation From Previous ColumnOperation Maintenance and StorageFeatures and Controls Pre-Start Check List Starting and OperationEngine and Blade Handle Height Adjustment StoppingPropelling the Mower Cutting Height Adjustment Installing the Discharge DeflectorRecycling Operation Removing the Recycling Plug Installing the Grass BagMaintenance Introduction Service After First 5 HoursService Periodic Wheel Drive Components Storage ProcedureMower Blade Replacement Standard Blade Wear LimitBlade Sharpening Wheel drive controls Components removed for clarity Wheel Drive Control AdjustmentEngine Drive Belt Replacement Belt ServiceBattery Service Rear Cover Removal and Installation To Install the Rear CoverTo Remove the Rear Cover Maintenance/Replacement Parts Service ScheduleProbable Cause Corrective Action TroubleshootingDisclaimer of Warranty Year Limited WarrantyPage Page Page Part Number Common Service Parts

SPV21675FC, SPV21675EFC, SPV21675EFC (7800266), SPV21675FC (7800265) specifications

The Snapper SPV21675EFC and SPV21675FC are remarkable additions to the lineup of professional-grade lawn care equipment designed for homeowners and landscapers who value efficiency and precision. These models showcase an array of innovative features and cutting-edge technologies, empowering users to maintain immaculate lawns and gardens with ease.

The SPV21675EFC and SPV21675FC are equipped with a robust 21-inch steel cutting deck, ensuring a durable and reliable performance. This size strikes a perfect balance, making it suitable for both small and medium-sized yards. The steel construction not only enhances the mower's durability but also contributes to a clean and consistent cut across various grass types.

One of the standout features of these mowers is the Smart Choke technology, which simplifies starting the engine. This user-friendly system automatically adjusts the choke position, reducing the need for manual adjustments by the operator. As a result, both novice and seasoned lawn care enthusiasts can enjoy hassle-free starts with minimal effort.

Powered by a reliable 163cc engine, the Snapper SPV21675EFC and SPV21675FC deliver impressive cutting power. This engine is designed for efficiency, providing sufficient torque to handle thick grass and uneven terrain without sacrificing performance. The mowers come with a variable speed self-propulsion system, allowing users to adjust the speed according to their comfort level and mowing conditions.

Another key characteristic is the versatile cutting height adjustment feature. With six different height positions, users can easily tailor the cutting length to suit their lawn's specific needs. This flexibility is essential for achieving the desired appearance and health of the grass.

The Snapper SPV21675 series also features an integrated rear bagging system, allowing for efficient grass collection as you mow. This system promotes a cleaner lawn by minimizing clippings left behind and reducing the need for additional raking or clean-up after mowing.

In summary, the Snapper SPV21675EFC and SPV21675FC mowers offer exceptional features, including a durable steel cutting deck, user-friendly Smart Choke technology, a powerful engine, variable speed capabilities, adjustable cutting heights, and an effective bagging system. These characteristics make them ideal choices for anyone seeking a reliable and efficient lawn care solution. Whether you're a homeowner looking to maintain your yard or a professional landscaper managing multiple properties, the Snapper SPV21675 series will undoubtedly meet and exceed expectations.
Top Page Image Contents