Snapper ZF2100DKU, ZF2300GKU, ZF5200M, ZF6100M OUT Front Z-RIDER Hydro Drive Series

Page 32

Safety Instructions & Operator’s Manual for

OUT FRONT Z-RIDER

HYDRO DRIVE

SERIES 0

IMPORTANT

Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings. Read, Understand, and Follow all warnings and instructions in this manual, the engine manual, and on the machine, engine and attachments. If you have any questions about your Snapper product, contact your local authorized Snapper dealer or contact Snapper Customer Service at Snapper, McDonough, GA. 30253. Phone: (1-800-935-2967).

WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

COPYRIGHT © 1999

SNAPPER INC.

ALL RIGHTS RESERVED

INSTRUCTION No. 4-5182 (REV. 3, 8/20/99)

32

Image 32
Contents OUT Front Z-RIDER Hydro Drive Series Important Safety Instructions Operation Table of Contents Introduction NomenclatureOperating Instructions PRE-START Check ListStarting Engine Starting & Stopping ENGINE, Blades Parking BrakeStopping Mower Blade Stopping EngineStarting Mower Blade Cutting Height Adjustment Operation Motion Control Driving Machine Check Mower Blade Service After First 5 HoursChange Engine OIL Mower Components Check Mower Drive BeltAfter Every 25 Operating Hours Before Operating Mower Riding Mower LubricationOther Lubrication Points Deck Removal Annually END of Each SeasonFuel Filter Diesel Engine only Power Transfer Shaft Removal Adjustments & Repair Neutral Position AdjustmentsParking Brake Adjustment Blade Wear Limits from previous Blade SharpeningMower Drive BELT, Engine Belt & Hydro Pump Belt Replacement Mower Drive Belt ReplacementMower Drive Belt Removal Engine Belt RemovalBattery Service Battery Battery RemovalBattery Installation Battery Battery TestingNEW Battery Preparation Do not OverfillRemove NUT Remove Belt From Spindle Remove Blade Bolt Troubleshooting Problem Probable Cause Corrective ActionProblem Probable Cause Corrective Action Service Schedule MAINTENANCE/REPLACEMENT PartsYear Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page OUT Front Z-RIDER Hydro Drive Series