Snapper 2300 PSI Pressure Washer
KNOW YOUR PRESSURE WASHER
Read this owner’s manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Spray Gun
Recoil Starter
Nozzle Extension
High Pressure Hose
Oil Fill
Cap/Dipstick
Fuel Cap 
Adjustable Nozzle | Chemical Injection |
| Siphon/Filter |
Air Cleaner
High Pressure Outlet
& Water Inlet
Pump equipped with Automatic
Cool Down System
Adjustable Nozzle — Always attached to nozzle extension. Adjustable nozzle allows you to adjust force of spray and spray pattern.
Air Cleaner — Dry type filter element limits the amount of dirt and dust that gets in the engine.
Automatic Cool Down System — Cycles water through pump when water reaches
Chemical Injection Siphon/Filter — Use to siphon detergent or other pressure washer chemicals into the low pressure stream.
DataTag (not shown, near rear of base plate) —
Provides model, revision and serial number of pressure washer. Please have these readily available if calling for assistance.
Fuel Cap — Fill with clean unleaded fuel here.
High Pressure Hose — Connect one end to water pump and the other end to spray gun.
High Pressure Outlet — Connection for pressure hose.
Nozzle Extension — Attach to spray gun to use adjustable nozzle.
Oil Fill Cap/Dipstick — Used for checking and adding oil. Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto cleaning surface with trigger device. Includes safety latch.
Water Inlet — Connection for garden hose.
4