Snapper 1721303-01 manual Table of Contents

Page 2

Table of Contents

Recommended Accessories

1

Maintenance & Normal Care Schedule

6

Safety Rules & Information

 

Schedule for Normal Care

6

 

Lubricate the Dozer Blade

6

General Warnings

2

 

 

Operating on Slopes

2

Adjustments

7

Preparation

2

Skid Shoe Adjustment

7

Operating Safety

2

Spring Tension

7

Features & Controls

3

Lift Height Adjustment

8

 

 

Blade Angle Control

3

Initial Setup & Assembly

 

Attachment Lift

3

Dozer Components

9

General Operating Instructions

 

Hitch Components

10

 

Assemble Blade

11

Checks Before Starting

4

Assemble Lift Rod

12

Engine & Ground Speed Selection

4

Install Blade

12

Transporting

4

Install Angling Control Rod

13

Starting & Stopping

4

 

 

Changing Angle of the Blade

5

Attaching & Removing the Hitch & Blade

 

Dozing Tips

5

Removing & Attaching Dozer Blade

14

Snow Plowing Tips

5

Hardware Identification

 

 

 

 

Storage

5

& Torque Specifications

15

NOTE: In these instructions, “left” and “right” are referred to as seen from the operating position.

Recommended Accessories

For best performance, it is recommended to use tire chains and two rear wheel weights. The maximum weight added to the tractor should not exceed 35 lbs. per wheel.

For operation on slopes greater than 15% (8.5°), Quick Tach Weights, tire chains, and wheel weights are recom- mended. Never operate on slopes greater than 17.6% (10°).

© Copyright 2000 Simplicity Manufacturing, Inc.

All Rights Reserved. Printed in USA.

TP 100-2374-01-AT-SMA

1

Image 2
Contents Snow Plow/Dozer Blade HitchTable of Contents Safety Rules Information General WarningsAttachment Lift Features ControlsBlade Angle Control Lever Engine & Ground Speed Selection General Operating InstructionsChecks Before Starting TransportingSnow Plowing Tips Changing Angle of the BladeDozing Tips Daily StorageLubricate Dozer Blade MaintenanceSchedule For Normal Care Spring Tension AdjustmentsSkid Shoe Adjustment Adjustments Lift Rod AdjustmentInitial Setup Assembly Qty DescriptionInitial Setup & Assembly Initial Setup & Assembly Assemble BladeInstall Blade Assemble Lift RodInstall Angling Control Rod Attaching Removing Removing & Attaching Dozer BladeHardware Identification & Torque Specifications