If the Weather Station is moved to another location significantly higher or lower than its initial standing point (for example from the ground floor to the upper floors of a house), remove the batteries and
THE WEATHER TENDENCY INDICATOR
Working together with the weather icons are the weather tendency indicators (the upward and downward arrow located near the Weather girl). When the indicator points upwards, it means that the
Therefore, user may see how the weather has changed and is expected to change. For example, if the indicator is pointing downwards together with cloudy icons, it means that the last noticeable change in the weather was when it was sunny (the sunny icon only). Therefore, the next change in the weather will be the cloudy icons since the indicator is pointing downwards.
Note: Once the weather tendency indicator has registered a change in air pressure, it will remain permanently visualized on the LCD.
37
DISPLAY OF INDOOR MAXIMUM AND MINIMUM RECORDS:
1.In normal display mode, press the MIN/ MAX button three times. The maximum indoor temperature and humidity will be shown. Also the date and time of recording this temperature will be displayed.
2.Press the MIN/ MAX button once more to display the minimum indoor temperature and humidity. Also the date and time of recording this temperature will be displayed.
RESETTING THE INDOOR MAXIMUM/ MINIMUM RECORDS
1.In normal display mode, press the MIN/ MAX button to advance to the MIN/ MAX display.
2.Press and hold the SET key for about 3 seconds; this will reset all indoor minimum and maximum data recorded to the current time, date, temperature and humidity. The max/ min temperature of the currently selected outdoor channel will also be reset at the same time.
DISPLAY OF OUTDOOR MAXIMUM AND MINIMUM RECORDS:
1.In normal display mode, press the CH/ + button to select the desired channel. The channel ID will be displayed above the outdoor temperature reading.
2.Press the MIN/MAX button, the max temperature of the selected channel will be displayed. Also the date and time of recording this temperature will be displayed.
3.Press the MIN/MAX button once more, the min temperature of the selected channel will be shown. Press the ALM button to go back to the normal display mode.
39
DISPLAY OF TEMPERATURE AND HUMIDITY READINGS:
INDOOR TEMPERATURE
The indoor temperature and humidity are measured automatically and displayed on the fourth section of the LCD.
|
| Indoor |
|
| Temperature |
Indoor Relative |
| in °F |
Humidity % |
|
|
|
|
OUTDOOR TEMPERATURE:
The last LCD section shows the outdoor temperature, a reception symbol and a channel number under the temperature will also show if more than one transmitter has been used.
Outdoor |
|
|
|
|
|
| Outdoor temperature |
|
|
|
|
|
| ||
Reception |
|
|
| ||||
|
|
| |||||
Symbol |
|
|
| in °F | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transmitter Identification No. (only shown |
|
| Maximum icon | ||||
| |||||||
when more than one transmitter is used) |
|
|
|
|
|
| |
38
RESETTING THE OUTDOOR MAXIMUM/ MINIMUM RECORDS
Note: It is required to reset the outdoor MAX/MIN temperature records of different channels separately.
1.In normal display mode, press the CH/ + button to select a channel (1, 2 or 3). The channel ID will be displayed above the outdoor temperature reading.
Note: The transmitter number will only be displayed if more than one transmitter is applied.
2.Press the MIN/ MAX button once. The max icon will be displayed.
3.Press and hold the SET button for about 3 seconds; this will reset all outdoor minimum and maximum temperature recorded to the current time, date and temperature.
Note: The max/ min temperature records of the indoor channel will also be reset at the same time.
SUNRISE/ SUNSET/ SUN DURATION TIME:
|
| Sunrise time/ Sunset |
Sunrise/ sunset |
| time/ Sun duration time |
|
| |
display |
| Short form of City |
|
| name (For example, |
|
| JFK - New York) |
40