Snooze Setting | La Crosse Technology WS-9711U-IT specs

Indiana

EVV – Evansville IND – Indianapolis

Kansas

DDC – Dodge City

K32 – Wichita

TOP – Topeka

	New Mexico
	ABQ – Albuquerque
	ABQ – Albuquerque	West Virginia
		West Virginia
		CRW – Charleston
	Nevada	CRW – Charleston
	Nevada
	LAS – Las Vegas
	RNO – Reno

	New York	Wisconsin
	BUF – Buffalo	GBR – Green Bay
	JFK – New York City	LSE – La Crosse
	SYR – Syracuse

	Ohio	Wyoming
	CLE – Cleveland	CPR – Casper
	CMH – Columbus

SNOOZE SETTING:

Flashing

The snooze time can be set OFF or to a maximum time of 30 minutes (default is 10 minutes):

1.	The snooze time (in minutes) digit will be flashing. Use the CH/ + key to set the
	snooze time (in minutes). Each pressing of the key will increase the snooze time by 5
	minutes. The snooze can also be set OFF when the “OFF” digit is being displayed.
2.	Confirm with the SET key and enter the “ºF/ºC temperature unit setting” or exit the
	manual setting mode by pressing the SNOOZE/ SUN key.

The Canadian cities are displayed as follows:

Code – City	Code – City	Code – City
ALB – Calgary	QUE – Quebec	Van – Vancouver
OTT – Ottawa	TOR – Toronto	WIN – Winnipeg

°F/°C TEMPERATURE UNIT SETTING

Flashing

The default temperature reading is set to °F (degree Fahrenheit). To select °C (degree Celsius):

1.The “°F” will be flashing, use the CH/ + key to toggle between “°F” and “°C”.

2.Once the desired temperature unit has been chosen, confirm with the SET key and enter the “Weather Forecast Icon Sensitivity setting” or exit the setting mode by pressing the SNOOZE/ SUN key.

WEATHER FORECASTING ICON SENSITIVITY SETTING

For locations with rapid changes of weather conditions, the threshold can be set to a different level for faster display of changing weather conditions.

Note:

If the snooze time has been set “OFF”, the snooze function will not be activated.

Flashing

1.The current sensitivity value will start flashing.

2.Using the CH/ + key to set the weather sensitivity level. There are 3 levels of setting: 1, 2 and 3; level 1 is the most sensitive setting, level 3 is the least sensitive setting (default setting is "2").

3.Confirm with the SET key and exit the Manual settings.