LCD Contrast Setting

Section 3 - WEATHER ICON (WEATHER GIRL)

∙The weather is represented in the form of 15 weather symbols (Weather Girl), which changes appearance depending on the air pressure development and the current outdoor temperature.

∙The weather girl icon representations can be seen in the section "WEATHER FORECAST AND TENDENCY".

Section 4 - INDOOR TEMPERATURE AND HUMIDITY

∙Current indoor temperature and humidity.

∙By pressing the MIN/ MAX key, display of the stored MIN/MAX indoor temperature and humidity, with simultaneous display of MIN/ MAX symbol in Section 5.

Section 5 - OUTDOOR TEMPERATURE

∙Displays the current outdoor temperature.

∙By pressing the MIN/ MAX key, display of the stored MIN/MAX outdoor temperature with simultaneous display of a MIN or MAX symbol.

∙By pressing the CH/ + key, display of outdoor sensors (up to three outdoor transmitters). The number 1, 2 or 3 will be shown.

∙A signal reception symbol will be shown indicating that receiver is receiving outdoor temperature.

Flashing

The LCD contrast can be set to 8 different levels (0 to 7) to suit the user’s needs (default LCD contrast setting is LCD 5). To set the desired contrast level:

1.Press and hold the SET key until the above display is seen. Press the CH/ + key to select the level of contrast desired.

2.Press the SET key to confirm and enter the “Time Zone setting” or exit the setting mode by pressing the SNOOZE/ SUN key.

TIME ZONE SETTING:

Flashing

MANUAL SETTINGS:

To enter the manual setting mode, press and hold the SET key for approximately 3 seconds until the first setting option appears and flashes (LCD contrast setting). From here, each time the SET key is pressed the next available setting option will be selected and will flash to indicate the current option. Once a setting has been made according to the specific instructions that follow, press the SET button once to move the next desired setting or repeatedly until the display returns to normal operating mode.

Note: If no buttons are pressed within approximately 15 seconds while in any setting option, the unit will return to normal operating mode.

∙LCD contrast setting

∙Time zone setting

∙Daylight saving time (DST) ON/OFF setting

∙Time reception ON/OFF setting

∙12/24-Hour setting

∙Manual time setting

∙Manual calendar setting

∙Sunrise/ Sunset city location

∙Snooze setting

∙°F/ °C setting

∙Weather forecasting icon sensitivity setting

The time zone default of the Weather Station is -5. To change to another time zone:

1.Press the SET key after completing the LCD contrast setting in order to enter the time zone setting (flashing).

2.Using the CH/ + key, set the time zone. The range runs from 12 to -12 in consecutive 1hour intervals. The U.S. time zones are (negative numbers) -5h (EST), -6h (CST), - 7h (MST) and –8h (PST) zones.

3.Press the SET key to confirm and enter the “Daylight Saving Time” (DST) or exit the setting mode by pressing the SNOOZE/ SUN key

DAYLIGHT SAVING TIME (DST) ON/OFF SETTING

Note: The DST default is “ON”, meaning that the

Flashing received time will automatically be adjusted according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes turn the DST ‘’OFF’’.

Flashing