La Crosse Technology WS-9057U instruction manual Setup, When ONE Transmitter is Used

Page 2

SETUP

WHEN ONE TRANSMITTER IS USED

1.First, insert the batteries in the transmitter (see “How to install and replace batteries in the Thermo-hygro outdoor transmitter” on page 11).

2.Within 2 minutes of powering up the transmitter, insert the batteries in the Weather Station (see “How to install and replace batteries in the Weather Station” on pages 11-12). Once the batteries are in place, all segments of the LCD will light up briefly and a short signal tone will sound. Following the indoor temperature/humidity and the time, as 12:00 will be displayed. If this information is not displayed on the LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. Once the indoor data is displayed user may proceed to the next step.

3.After the batteries are inserted, the Weather station will start receiving data signal from the transmitter. The outdoor temperature and humidity data should then be displayed on the Weather station. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1.

4.The distance between the Weather Station and the transmitter

5

4.The outdoor temperature and humidity data from the first transmitter (channel 1) and the signal reception icon should be displayed on the Weather Station. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1.

5.Insert the batteries in the second transmitter as soon as the signal reception icon and outdoor data are displayed on the Weather Station. Then within 2 minutes, the channel 2 outdoor data from the second transmitter and the "channel 2" icon should be displayed on the Weather Station. If this does not happen after 2 minutes, the batteries will need to be removed from all the units and reset from step 1.

Note : User shall insert the batteries into the second transmitter within 45 seconds after the Weather Station displays the information of the first transmitter.

6.Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on the Weather Station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed and the channel icon will shift back to "1" once the third transmitter is successfully received. If this is not happen, user shall restart the setting up from step 1.

7

should not be more than 300 feet to ensure sufficient 915 MHz transmission. (see notes on “Positioning” and “915 MHz Reception”).

Note: In the event of changing batteries of the units, ensure the batteries do not spring free from the contacts. Always wait at least 1 minute after removing the batteries before reinserting, otherwise start up and transmission problems may occur.

WHEN MORE THAN ONE TRANSMITTER IS USED

1.User shall remove all the batteries from the Weather Station and transmitters, and wait 60 seconds.

2.Insert the batteries in the first transmitter.

3.Within 2 minutes of powering up the first transmitter, insert the batteries in the Weather Station. Once the batteries are in place, all segments of the LCD will light up briefly and a short signal tine will sound. Following the indoor temperature/humidity and the time as 12:00 will be displayed. If this information is not displayed on the LCD after 60 seconds, remove the batteries from both units and wait for at least 60 seconds before reinserting them.

6

Note : User shall insert the batteries into the third transmitter within 45 seconds after the Weather Station displays the information of the first transmitter. Or immediately after reception of the second transmitter is finished.

7.The distance between the Weather Station and the transmitter should not be more than 300 feet to ensure sufficient 915 MHz transmission. (see notes on “Positioning” and “915 MHz Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed as described above. Should transmission problems occur, it is necessary to remove the batteries from all units and start again the set-up from step 1.

Notes:

∙If the signal reception is not successful on the first frequency of 915MHz for 45 seconds, the frequency is changed to 920MHz and the learning is tried for another 45 seconds. If it is still not successful the reception is tried for 45 seconds on 910MHz. This will also be done during re-synchronization.

8

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Weather Station Inventory of ContentsFeatures Thermo-Hygro TransmitterSetup When ONE Transmitter is UsedTo Install and Replace Batteries in the Weather Station Battery ChangeDevice Reset About Wwvb Radio Controlled TimeFunction Keys LCD ScreenLCD Contrast Setting Manual SettingsDaylight Saving Time ON/OFF Setting DST ON/OFF Time Zone SettingCalendar Setting 12/24-HOUR Format SettingManual Time Setting Temperature SettingAlarm Setting Relative AIR Pressure Value SettingTo Exit the Manual Setting Mode Weather Forecasting Icon Sensitivity SettingToggling and Resetting the Indoor Readings Indoor Relative Humidity and Indoor TemperatureComfort Level Indicator Sunny Cloudy with sunny intervalsWhen more than 1 transmitter used Weather Tendency IndicatorOutdoor Temperature and Humidity Data To View the MIN/MAX Data from Different TransmittersPositioning the Weather Station LOW Battery IndicatorAbout the Outdoor Transmitter Checking for 915MHz ReceptionWarranty Care and MaintenanceSpecifications Temperature measuring rangeLosey Blvd S La Crosse, WI

WS-9057U specifications

The La Crosse Technology WS-9057U is an advanced wireless weather station designed for those who want to monitor atmospheric conditions with precision and ease. This compact device combines functionality with user-friendly features, making it an excellent choice for both casual users and weather enthusiasts alike.

At the core of the WS-9057U is its ability to provide real-time weather data. Equipped with a wireless outdoor sensor, it accurately measures outdoor temperature and humidity levels, transmitting the information back to the indoor display unit. The sensor features a robust design that ensures optimal performance in various weather conditions, allowing users to monitor their environment effectively.

One of the standout features of the WS-9057U is its ability to display multiple weather parameters simultaneously. Users can enjoy a comprehensive view of the current outdoor temperature, humidity, and historical data for better context. The device also includes a memorable display of minimum and maximum temperature and humidity readings, enabling users to track changes over time.

The WS-9057U employs wireless technology to ensure seamless communication between the sensor and the display unit. Its 433 MHz RF signal provides a range of up to 330 feet, making placement options versatile. Users can position the outdoor sensor away from the house or garage, providing flexibility to monitor atmospheric conditions in different parts of their property.

In addition to its weather measuring capabilities, the La Crosse Technology WS-9057U features a clock with a snooze function, ensuring that it serves not only as a weather station but also as a practical household accessory. Users can also benefit from a user-friendly interface that makes navigation through its various settings and options easy.

Energy efficiency is another commendable characteristic of the WS-9057U. The device operates on simple, cost-effective batteries, providing convenience and reducing the need for frequent replacements. Coupled with efficient power management, users can enjoy long-term functionality without the hassle of constant maintenance.

The La Crosse Technology WS-9057U is an impressive combination of technology, simplicity, and functionality. Whether you’re interested in monitoring local weather conditions for planning activities or simply wish to enhance your home’s meteorological knowledge, the WS-9057U captures the essence of a reliable weather station, making it an appealing addition to any household.
Top Page Image Contents