La Crosse Technology WS-9228U-IT instruction manual Inventory of Contents, Table of Contents

WS-9228U-IT

Wireless 915 MHz

Radio-controlled Weather Station

Instruction Manual

This product offers:	INSTANT TRANSMISSION is the state-
	of-the-art new wireless transmission
	technology,	exclusively designed			and
	developed	by	LA	CROSSE
	TECHNOLOGY.			INSTANT
	TRANSMISSION		offers	you	an

immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in real-time!

INVENTORY OF CONTENTS

1.The Wireless Weather Station/ (Figure 1).

2.One remote temperature sensor with mounting bracket (Figure 2).

3.Two each, ½” Philips screws.

4.Instruction manual and warranty card.

Figure 1

TABLE OF CONTENTS

TopicPage

Inventory of Contents/Additional Equipment

About WWVB

Quick Set-Up Guide

Detailed Set-Up Guide

Battery installation

Program Mode

Program Sequence and Default Settings

Function Keys

Setting the LCD Contrast

Setting the Time Zone

Daylight Saving Time Setting

Radio-controlled Time Setting

12/24-hour Time Setting

Setting the Time

Setting the Year, Day and Month

Setting the Snooze

Setting the Temperature Format

Setting the Forecast Sensitivity

Features

Weather Forecast Icons and Tendency Arrows

Indoor Temperature, Humidity, & Comfort

Level Indicator

Outdoor Temperatures and Humidity

Alarm Function (Setting Alarm 1 & 2) (Snooze & Silence)

Minimum & Maximum Records (Indoor,

Outdoor, & Resetting)

Additional Remote Control Sending Units (Set-Up, Viewing,

&Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information

2

ABOUT WWVB (Radio Controlled Time)

The NIST (National Institute of Standards and Technology—Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time and date signal continuously throughout the United States at 60 kHz. The signal can be received up to 2,000 miles away through the internal antenna in the Weather Station. However, due to the nature of the Earth’s Ionosphere, reception is very limited during daylight hours. The Weather Station will search for a signal every night when reception is best. The WWVB radio station derives its signal from the NIST Atomic clock in Boulder, Colorado. A team of atomic physicists is continually measuring every second, of every day, to an accuracy of ten billionths of a second per day. These physicists have created an international standard, measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum. For more information on the atomic clock and WWVB please see the NIST website at http://www.boulder.nist.gov/timefreq/stations/wwvb.htm.

QUICK SET-UP GUIDE

Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.

1.Have the Wireless Weather Station and remote temperature sensor 3 to 5 feet apart.

2.Batteries should be out of both units for 10 minutes.

3.Place the batteries into the remote temperature sensor first then into the indoor weather station.

(All remote temperature sensors must be started before the Wireless Weather Station)

4.DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

In this time the Wireless Weather Station and remote temperature sensor will start to talk to each other and the display will show both the indoor temperature and humidity, and an outdoor temperature. If the Wireless Weather Station does not display both temperatures after the 15

Time LCD

Date LCD

Forecast LCD

Indoor LCD

Outdoor LCD

Mounting	TX29U-IT remote
Bracket	temperature sensor

Figure 2

minutes please retry the set up as stated above. After both indoor and outdoor temperatures are displayed for 15 minutes you can place your remote temperature sensor outdoor and set your time.

The remote temperature sensor should be placed in a dry, shaded area. The temperature sensor has a range of 330 feet. Keep in mind that the 330 feet is in open air with no obstructions and that radio waves DO NOT curve around objects. Actual transmission range will vary depending on what is in the path of the signal. Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.

Example: A Wireless Weather Station with a 330 feet range is mounted on an interior wall, so that the signal has to pass through one interior wall, one exterior wall, and across the 10 feet width of the room between the 2 walls. The first wall will reduce the range to 165 feet, and the second wall will reduce the range to 87 feet. Factoring in the 10 foot room, this leaves a maximum of 77 feet of remaining signal range.

ADDITIONAL EQUIPMENT (not included)

1.Two fresh AA 1.5V Alkaline batteries for the Wireless Weather Station.

2.Two fresh AA 1.5V Alkaline batteries for the remote temperature sensor.

3.One, Philips screwdriver for mounting.

This allowance is typically enough for a frame wall with non-metallic siding; however certain materials can reduce range even further. Metal siding, stucco, and some types of glass can reduce signal range by as much as ¾ or more, compared to the ½ reduction typical of most obstructions. It is possible to receive a signal through these materials, however maximum range will be much less due to their tendency to absorb or reflect a much larger portion of the sensor’s signal.

3 4