Battery Installation, LOW Battery Warning

BATTERY INSTALLATION

NOTE: Install the batteries; select the channel and temperature in C° or F° before mounting the remote sensor.

•Remove the screws from the battery compartment with a small Phillips screwdriver.

•Set the channel. The switch is located in the battery compartment. Channel 1 is typically selected if only one remote sensor is being used.

•Install 2 “AA” size alkaline batteries (not included) matching the polarities shown in the battery compartment.

•Replace the battery compartment door and secure the screws.

•Secure remote sensor in the desired location.

LOW BATTERY WARNING

A low-battery indicator [ ] will appear on the remote temperature reading line of the main unit, warning that the remote sensor batteries need replacement.

PLACEMENT OF THE REMOTE SENSOR

The remote sensor can be mounted on the wall using the recessed screw hole or placed on a flat surface indoors or outdoors.

GETTING STARTED

After batteries are installed; remote sensor will transmit temperature readings at 45 second intervals.

The main unit may take up to two minutes to receive the initial readings. Upon successful reception, remote temperature will appear on the main unit’s display. The main unit will automatically update readings at 45-second intervals.

LOST COMMUNICATION

If the main unit display line for the remote sensor reading goes blank, refer to the main unit’s User Manual to find out the way to begin a new signal search. If the signal still isn’t received, please make sure that:

•The remote sensor is in its proper location.

•The distance between main unit and remote sensor is not over 100 feet (30meters).

•The path between units is clear of obstacles. Shorten the distance if necessary.

•Fresh batteries are installed correctly in both remote sensor and main unit.

If there is no reception, please perform the following steps:

•Bring the main unit and remote sensor close together.

•Remove four (4) small screws from the back of the remote sensor with small Phillips screwdriver, and open the battery compartment.

•Remove the batteries from the battery compartment and reinstall them in the same manner. Remote sensor LED indicator will flash showing transmission of the signal.

TS13C specifications

The Honeywell TS13C is a sophisticated temperature and humidity sensor that stands out for its precision and reliability in various applications. Designed for use in HVAC systems, environmental monitoring, and industrial processes, the TS13C offers a blend of advanced technologies and essential features that cater to the needs of both commercial and residential environments.

One of the key characteristics of the TS13C is its dual sensing capability, which allows it to measure both temperature and relative humidity simultaneously. This dual functionality makes it an efficient solution for maintaining optimal indoor air quality and comfort levels. The device boasts a wide temperature range, typically spanning from -40°C to +85°C, and a humidity measurement range of 0% to 100% RH, ensuring versatility in different environmental conditions.

The TS13C employs Honeywell’s state-of-the-art sensing technology, which enhances accuracy and stability over time. The sensor often includes a digital output, facilitating seamless integration with contemporary building management systems. Its high-resolution readings enable precise control for HVAC systems, resulting in improved energy efficiency and lower operational costs.

Another important feature of the TS13C is its robust design, built to withstand harsh environments, making it suitable for industrial applications. With an IP rating that signifies protection against dust and moisture, the sensor ensures durability and longevity even under challenging conditions.

The installation process for the TS13C is user-friendly, thanks to its compact design and flexible mounting options. This ease of installation is particularly beneficial for retrofitting existing systems or integrating new setups. Additionally, the sensor often supports various communication protocols, including analog and digital outputs, further enhancing its compatibility with a wide array of systems.

Moreover, the TS13C is equipped with advanced calibration capabilities, allowing for easy adjustment and fine-tuning to meet specific application requirements. This ensures that the sensor maintains optimal performance throughout its operational life.

In summary, the Honeywell TS13C is a cutting-edge temperature and humidity sensor that combines accuracy, durability, and versatility. Its advanced technologies and features make it an ideal choice for various applications, paving the way for improved environmental control and energy efficiency. Whether for HVAC systems or industrial processes, the TS13C delivers reliable performance and ease of integration, setting a high standard in environmental monitoring solutions.