Cisco Systems 1500 Series manual Grounding the Access Point, Streetlight Pole Installations

Page 21

Chapter 2 Mounting Instructions

Mounting the Access Point

C i s c o C o n f i d e n t i a l - D r a ft 1

Grounding the Access Point

Warning This equipment must be externally grounded using a customer-supplied ground wire before power is applied. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 366

Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074

In all outdoor installations and when powering the access point with AC power, you must follow these instructions to properly ground the case:

Step 1 If using insulated 10-AWG copper ground wire, strip the insulation as required for the grounding lug.

Step 2 Use the appropriate crimping tool to crimp the bare 10-AWG copper ground wire to the grounding lug (Panduit PN-10-6R-2K lug supplied).

Step 3 Connect the grounding lug to the access point grounding screw hole using the supplied Phillips head screw (6-32x1/4 stainless steel) with lock washer (McMaster-Carr 95345A458 or equivalent). The grounding screw hole is located on the mounting plate side of the access point case near the 5-GHz antenna connector (see Figure 2-6). Tighten the grounding screw to 7 to 8 in. lbs. Do not overtighten!

Step 4 If necessary, strip the other end of the ground wire and connect to a reliable earth ground, such as a grounding rod or an appropriate grounding point on a metal streetlight pole that is grounded (see Figure 2-1and Figure 2-11).

Streetlight Pole Installations

The access point can be installed where power is available, without the need for a wired LAN connection. The access point uses intelligent wireless routing that is based on the Adaptive Wireless Path Protocol (AWPP). AWPP enables a remote access point to dynamically optimize the best route to the wired LAN network using another access point.

The LAP1510 model uses the 5-GHz radio for the Mesh backhaul Mesh connections. The 2.4-GHz radio is used for local wireless client access. The LAP1505 model uses the 2.4-GHz radio for both Mesh backhaul and local wireless client access.

The access point can be installed on a streetlight pole and powered from a streetlight outdoor light control using the optional streetlight power tap adapter.

Caution The access point can be powered by a light pole twist-lock outdoor light control that provides 100- to 240-VAC 50/60 Hz power. Do not connect to an outdoor light control powered by higher voltages.

When powering the access point with AC power other than the streetlight power tap adapter, you must ensure that the following conditions are observed:

1.AC power can be conveniently removed from the unit. The power should not be removed by disconnecting the AC power connector on the unit.

Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide

 

OL-9977-05

2-21

 

 

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Mounting Instructions Unpacking the Access Point Package ContentsTools and Materials Safety Information Safety Precautions FCC Safety Compliance StatementAvoiding Damage to Radios in a Testing Environment Site Surveys Installation GuidelinesBecoming Familiar with Access Point Installation Components Before Beginning the InstallationComponents in a Typical Access Point Installation Access Point Connectors Choose Security MAC Filtering New Enabling Zero Touch Configuration on the ControllerMounting the Access Point Configuring a RAPInstallation Options Access Point Mounting Orientations Preferred Horizontal Orientation 5illustrates the access point vertical orientation Access Point Mounting Plate and Carriage Bolts Mounting Plate Screw Hole Locations Roof-Overhang InstallationMounting the Access Point on a Pole Adjustment Plate Attached to the Mounting Plate Pole Clamp and Clamp Adjustment Plate Mounted on a Pole 10 Access Point Attached to the Pole Clamp Streetlight Pole Installations Grounding the Access PointS c o C o n f i d e n t i a l D r a ft 11 Using the Streetlight Power Tap Adapter What to Do Next

1500 Series specifications

Cisco Systems has long been a forerunner in networking and cybersecurity solutions, and the Cisco 1500 Series represents a significant advancement in their offerings. Designed primarily for industrial environments, this series aims to facilitate reliable and secure connectivity in challenging conditions. The Cisco 1500 Series includes various models tailored to a wide range of applications, including critical infrastructure, smart cities, and the Internet of Things (IoT).

One of the standout features of the Cisco 1500 Series is its rugged design. Built to withstand extreme temperatures, vibration, and moisture, the devices are suitable for deployment in outdoor settings and industrial applications. This robust construction ensures that the devices remain operational under harsh conditions, promoting uninterrupted service delivery.

Moreover, the Cisco 1500 Series is equipped with advanced wireless technologies, including Wi-Fi 6 and secure mesh networking capabilities. Wi-Fi 6 provides higher throughput, better efficiency, and improved performance in environments crowded with multiple devices. The secure mesh functionality allows for seamless connectivity across large areas, enabling organizations to expand their networks without sacrificing performance or security.

Security is another critical aspect of the Cisco 1500 Series. With integrated security protocols and robust encryption methods, these devices safeguard sensitive data transmission. The series supports end-to-end encryption and access control measures, helping organizations comply with stringent regulatory requirements while protecting against cybersecurity threats.

Management and configuration of the Cisco 1500 Series are simplified through Cisco's cloud management solutions. Users can deploy, manage, and monitor their networks remotely, allowing for efficient oversight and real-time troubleshooting. This ability to manage devices from a centralized interface reduces the complexity often associated with network administration.

Additionally, the Cisco 1500 Series supports various IoT protocols, making it ideal for organizations looking to implement smart technologies. The series is compatible with standards such as MQTT and CoAP, enhancing interoperability among devices and systems, and enabling the creation of more efficient and intelligent environments.

In summary, the Cisco 1500 Series provides robust, secure, and efficient networking solutions suited for industrial and outdoor applications. Its rugged design, advanced wireless capabilities, integrated security features, and support for IoT protocols make it a compelling choice for organizations looking to enhance their connectivity and infrastructure reliability.
Top Page Image Contents