Before Beginning the Installation

Chapter 2 Mounting Instructions

Installation Guidelines

C i s c o C o n f i d e n t i a l - D r a ft 1

•Antenna type and placement—Proper antenna configuration is a critical factor in maximizing radio range. As a general rule, range increases in proportion to antenna height. However, do not place the antenna higher than necessary, because the extra height also increases potential interference from other unlicensed radio systems and decreases the wireless coverage from the ground.

•Physical environment—Clear or open areas provide better radio range than closed or filled areas.

•Obstructions—Physical obstructions such as buildings, trees, or hills can hinder performance of wireless devices. Avoid locating the devices in a location where there is an obstruction between the sending and receiving antennas.

Before you begin the installation process:

•Ensure that a site survey has been performed.

•Ensure that your network infrastructure devices are operational and properly configured.

•Ensure that your controllers are connected to switch trunk ports.

•Ensure that your switch is configured with untagged access ports for connecting your access points.

•Ensure that a DHCP server with Option 43 configured is reachable by your access points or manually configure the controller information in the access point (for additional information, refer to the “Configuring DHCP Option 43” section on page G-1).

•Become familiar with the access point installation components (see the “Becoming Familiar with Access Point Installation Components” section on page 2-7).

•Add the MAC addresses of the access points to the controller’s filter list (see the “Adding the Access Point MAC Addresses to the Controller Filter List” section on page 2-10).

•Enable automatic configuration of access points on the controller (see the “Enabling Zero Touch Configuration on the Controller” section on page 2-10).

Becoming Familiar with Access Point Installation Components

The access point is designed to be installed in an indoor or outdoor environment, such as an interior wall or ceiling or the exterior roof overhang of a tall building or a streetlight pole.

Note When you mount access point in an indoor environment, you must also mount the attached antennas in an indoor environment.

Carefully review the following figures to become familiar with the system components, connectors, indicators, cables, system interconnection, and grounding:

•Components in a Typical Access Point Installation (Figure 2-1)

•Access point connectors (Figure 2-2)

•Streetlight power tap installation (Figure 2-3)

Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide

	OL-9977-05	2-7

1500 Series specifications

Cisco Systems has long been a forerunner in networking and cybersecurity solutions, and the Cisco 1500 Series represents a significant advancement in their offerings. Designed primarily for industrial environments, this series aims to facilitate reliable and secure connectivity in challenging conditions. The Cisco 1500 Series includes various models tailored to a wide range of applications, including critical infrastructure, smart cities, and the Internet of Things (IoT).

One of the standout features of the Cisco 1500 Series is its rugged design. Built to withstand extreme temperatures, vibration, and moisture, the devices are suitable for deployment in outdoor settings and industrial applications. This robust construction ensures that the devices remain operational under harsh conditions, promoting uninterrupted service delivery.

Moreover, the Cisco 1500 Series is equipped with advanced wireless technologies, including Wi-Fi 6 and secure mesh networking capabilities. Wi-Fi 6 provides higher throughput, better efficiency, and improved performance in environments crowded with multiple devices. The secure mesh functionality allows for seamless connectivity across large areas, enabling organizations to expand their networks without sacrificing performance or security.

Security is another critical aspect of the Cisco 1500 Series. With integrated security protocols and robust encryption methods, these devices safeguard sensitive data transmission. The series supports end-to-end encryption and access control measures, helping organizations comply with stringent regulatory requirements while protecting against cybersecurity threats.

Management and configuration of the Cisco 1500 Series are simplified through Cisco's cloud management solutions. Users can deploy, manage, and monitor their networks remotely, allowing for efficient oversight and real-time troubleshooting. This ability to manage devices from a centralized interface reduces the complexity often associated with network administration.

Additionally, the Cisco 1500 Series supports various IoT protocols, making it ideal for organizations looking to implement smart technologies. The series is compatible with standards such as MQTT and CoAP, enhancing interoperability among devices and systems, and enabling the creation of more efficient and intelligent environments.

In summary, the Cisco 1500 Series provides robust, secure, and efficient networking solutions suited for industrial and outdoor applications. Its rugged design, advanced wireless capabilities, integrated security features, and support for IoT protocols make it a compelling choice for organizations looking to enhance their connectivity and infrastructure reliability.