Agilent Technologies E4417A, E4416A manual TQPV2CPGN-GUCPF%QPPGEVKQPU

(TQPV￿2CPGN￿-G[U￿CPF￿%QPPGEVKQPU )GVVKPI￿5VCTVGF

(TQPV￿2CPGN￿-G[U￿CPF￿%QPPGEVKQPU

This section briefly describes the functions of the front panel keys and

connectors. The User’s Guide shows you how to use them in more detail.

These keys are located to the left of the display.

KeyFunction

Preset

Local

Press this key to switch the meter between on and standby. When power is supplied, the orange LED above the key is lit. Press the key to switch the meter on. The green LED lights.

Press this key to select the measurement window or the individual measurement display lines. Any measurement setup you create is implemented in the selected measurement.

Press this key to choose windowed, expanded, or full-screen display.

Press this key to preset the power-meter when it is operating in local mode (front panel operation). A pop-up- window is displayed asking you to confirm the command. It also enables you to take control of the meter from the front panel when operating via the remote interfaces (when Local Lock Out is not enabled).

￿￿