Agilent Technologies E4416A, E4417A Qornkcpegcpf/Ctmkpiu, Ngevtqocipgvke%Qorcvkdknkv/%, 5CHGV

4GIWNCVQT[￿+PHQTOCVKQP %QORNKCPEG￿CPF￿/CTMKPIU

%QORNKCPEG￿CPF￿/CTMKPIU

+'%￿￿￿￿￿￿￿￿￿%QORNKCPEG

This instrument has been designed and tested in accordance with publication EN61010-1(1993) / IEC 61010-1(1990) +A1(1992) +A2(1995) / CSA C22.2 No. 1010.1(1993) Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, and has been supplied in a safe condition. The instruction documentation contains information and warnings which must be followed by the user to ensure safe operation and to maintain the instrument in a safe condition.

'NGEVTQOCIPGVKE￿%QORCVKDKNKV[￿￿'/%￿

This product conforms with the protection requirements of European Council Directive 89/336/EEC for Electromagnetic Compatibility (EMC).

The conformity assessment requirements have been met using the technical Construction file route to compliance, using EMC test specifications EN 55011:1991 (Group 1, Class A) and

EN 50082-1:1992.

In order to preserve the EMC performance of the product, any cable which becomes worn or damaged must be replaced with the same type and specification.

Refer to the Declaration of Conformity on page 41.

5CHGV[

This instrument has been designed and tested in accordance with publication EN61010-1(1993) / IEC 1010-1(1990) +A1(1992) +A2(1995) / CSA C22.2 No. 1010.1(1993) Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, and has been supplied in a safe condition. The instruction documentation contains information and warnings which must be followed by the user to ensure safe operation and to maintain the instrument in a safe condition.

￿￿