Agilent Technologies E4416A, E4417A manual Connector

)GVVKPI￿5VCTVGF (TQPV￿2CPGN￿-G[U￿CPF￿%QPPGEVKQPU

These keys and connectors are associated with the measurement channels and

are located on the right-hand side of the front panel.

Key

Frequency

Cal Fac

Zero

Cal

Connector

POWER REF

50 MHz

CHANNEL

A

Function

Press this key to access the input frequency, and sensor calibration factor menus. Use these functions to improve the accuracy of your measurement. Refer to the User’s Guide for more information.

Press this key to access the zero and calibration menus. Use these functions to improve the accuracy of your measurement. Refer to the User’s Guide for more information.

Function

The power-reference is a 1 mW (0 dBm) 50 MHz signal available from a 50 ohm type-N connector. It is used for calibrating the sensor and meter system. If the meter is configured with Option 003, the connector is fitted to the rear panel. The Green LED beside the connector is lit when the calibrator is turned on.

The sensor input connectors (Agilent E4417A shown, the E4416A has one input). If the meter is configured with Option 002 or Option 003, the connectors are fitted to the rear panel.

B

￿￿