Setup: Geographic Region
Select your geographic region according to the map (pictured right) by pressing the “geo” button, located on the back of the unit in the battery compartment. The letters for each corresponding GEO region are shown on the display screen. Geographic region must be set in order for Precision Forecasting to function
properly. *The “
” icon and geographic region letter are only visible in GEO set mode. You will automatically exit GEO set mode if no buttons are pressed for 10 seconds. Enter GEO set mode at any time by pressing the “geo” button located inside the battery compartment.
A B C D
E F G
Intelli-Time® Clock
to the correct time and date, and update automatically for Daylight Saving Time. All you need to do is select your time zone using the “zone” button located inside the battery compartment.
Set the Time, Date & Units
Press the “SET” button, located on the back of the display unit, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display.
To adjust the currently selected (flashing) item, press and release the “p” or “q“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button again to adjust the next preference. The preference set order is as follows:
TIME ZONE ( PST MST CST EST AST HAST AKST) AUTO DST (Daylight Saving Time ON or OFF)*
CLOCK HOUR
CLOCK MINUTE CALENDAR MONTH CALENDAR DATE CALENDAR YEAR
UNITS: TEMPERATURE (ºF or ºC)
*If you live in an area that observes DST, DST should be set to ON even if it is not currently Daylight Saving Time.
You will automatically exit SET MODE if no buttons are pressed for 30 seconds. Enter SET MODE at any time by pressing the “SET” button.
7