Acu-Rite 00608BPDI In-1 Sensor Installation Guidelines, Basic Setup is Complete, Learning Mode

Page 6

3-in-1 Sensor Installation Guidelines

INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the ground (higher is better for wind measurement) in an open area. Secure to fence post, 2ʼx4ʼ wood, 3/4” pole, etc. (not included)

LEVEL INSTALLATION Use a bubble level (not included) to ensure level installation for accurate wind measurement.

Top or Side Mount

Top Mount

Side Mount

1.Insert the mounting base into the hole on the bottom of the sensor.

2.Use one of the screws included in the hardware bag to fasten the lower sensor housing to the mounting base.

3.Make sure the sensor is level using

a bubble level.

4. Fasten mounting base to a post or railing using 2 screws.

Pole Mount

1. Insert 3/4” schedule 40 PVC (25.8 mm

O.D.) pole (not included) or similar item

 

Pole Mount

all the way into the hole on the bottom of

 

 

 

the sensor. Note: Mounting base not used.

 

Do not install during

 

 

2. Use one of the screws included in the

 

electrical storms. Do

hardware bag to fasten the lower sensor

 

not place pole or

housing securely to the pole.

 

sensor near

 

electrical lines or

 

 

3. Make sure the sensor is level using a

 

electrical equipment.

bubble level.

 

 

The 3-in-1 sensor is now ready to use.

Basic Setup is Complete

The 3-in-1 sensor will now synchronize with the display unit. It may take a few minutes for synchronization to complete. If both or one of the units appear to be functioning improperly, please refer to the troubleshooting section.

10

OPERATION

Using the Weather Center

Weather Forecast

AcuRiteʼs patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy - personalized for your exact location.

 

RAIN

LIGHT RAIN

PARTLY

CLEARING

EXAMPLE

LIKELY

LIKELY

CLOUDY

 

OF WEATHER

 

 

 

 

FORECAST

 

 

 

 

DISPLAY

 

 

 

 

ICONS

(flashing=stormy)

 

 

 

 

 

 

 

RAIN/SNOW

SNOW

LIGHT SNOW

CLOUDY

MOSTLY

MIX LIKELY

LIKELY

LIKELY

CLOUDY

 

(flashing=stormy)

 

 

 

 

View the complete list of icons at www.AcuRite.com/acurite-icons

“Learning Mode”

Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure and temperature over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction.

Barometric Pressure

Subtle variations in barometric pressure greatly affect the weather. This weather center displays the current pressure with an arrow icon to indicate the direction the pressure is trending (FALLING, STEADY, or RISING).

High & Low Records

The Record Highs & Lows button ( ) displays minimum and maximum recordings for outdoor and indoor temperature and humidity. To select between viewing daily (since midnight) or all-time records, slide the switch located on the back of the display. To reset low records, press and hold the ( ) button while viewing low records. To reset high records, press and hold the ( ) button while viewing high

records.

Wind Speed

The Wind area of the display features

WIND SPEED PEAK, AVERAGE, CURRENT WIND SPEED, and a graphic representation of current wind speed. There is also a time stamp for the last wind speed reading.

11

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Weather Center Package Contents Features & BenefitsUnpacking Instructions Learning Mode Icon Current Outdoor TemperatureAdjust Up Arrow Low Battery IndicatorInstall or Replace Batteries In-1 Sensor SetupDisplay Unit Setup Set the A-B-C SwitchAtomic Clock Placement for Maximum AccuracyImportant Placement Guidelines Set the Time, Date & UnitsUsing the Weather Center Weather Forecast In-1 Sensor Installation GuidelinesBasic Setup is Complete Learning ModeTroubleshooting In-1 Sensor Care Care & Maintenance Display Unit CareCalibration Calibrate Temperature & Humidity Calibrate Barometric PressureSpecifications Customer Support

00608BPDI specifications

The Acu-Rite 00608BPDI is a state-of-the-art digital weather station that provides users with comprehensive and accurate weather data right from the comfort of their homes. For weather enthusiasts and anyone interested in tracking environmental conditions, this device delivers exceptional performance and advanced features.

One of the key features of the Acu-Rite 00608BPDI is its ability to monitor various weather parameters, including indoor and outdoor temperature, humidity, wind speed, and rainfall. It comes equipped with a wireless outdoor sensor that communicates seamlessly with the main indoor display unit, providing real-time updates about changing weather conditions. The outdoor sensor boasts a robust range, allowing it to transmit data from a considerable distance, making it an excellent choice for suburban settings or larger spaces.

Another significant aspect of the Acu-Rite 00608BPDI is its user-friendly interface, which displays all essential information in an easily readable format. The station features a bright, color display that presents data in an intuitive layout, enabling users to access vital weather information at a glance. The device also includes customizable alerts, which notify users if temperature or humidity falls outside their predetermined thresholds. This feature is particularly useful for those managing indoor plants or sensitive equipment.

In terms of technology, the Acu-Rite 00608BPDI utilizes patented technology for precise measurements, ensuring that users receive accurate, real-time data. The device is equipped with self-calibrating sensors that analyze the past 14 days of weather data within the user’s specific location. This unique feature allows the station to provide hyper-local forecasts, which are more reliable than general predictions available from other sources.

Additionally, the Acu-Rite 00608BPDI is designed for easy installation and setup. Most users can have their weather station up and running within minutes, thanks to the intuitive instructions and clear prompts. The durable construction and weather-resistant design of the outdoor sensor ensure that it stands up to various environmental conditions, ensuring longevity and reliable performance.

In summary, the Acu-Rite 00608BPDI is an exceptional digital weather station that combines advanced technology with user-friendly features. From real-time data tracking to customizable alerts and self-calibrating sensors, it provides all the necessary tools for anyone looking to stay informed about their local weather conditions. Whether for personal interest or practical applications, the Acu-Rite 00608BPDI stands out as an excellent choice for weather monitoring.
Top Page Image Contents