Samsung AH68-01943R, AH68-01963S Settings

ENG

SETUP

4544

Settings (Con’t)

Please use the Registration code to register this player with the DivX (R) video on demand format.

To learn more, go to www.divx.com/vod.

DivX (R) registration

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.

To play back the DVD-Video por tion of the DVD-Audio disc, set the unit to DVD-Video mode.

1Press the EJECT button and then press the MENU button.

2Press the Cursor button to move to <Setup> and then press the

ENTER button.

3Press the Cursor button to move to <DVD TYPE> and then press the

ENTER button.

4Press the Cursor , button to move to <DVD VIDEO> and then press the

ENTER button.

Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.

When Selecting DVD Play Mode:

• DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.

• DVD AUDIO : set to play the default DVD audio.

DVD Playback Mode

• DVD Play mode is set to DVD Audio as factory default setting.

• Powering off the main unit will automatically switch to the DVD Audio mode.

MOVE ENTER EXITRETURN

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match

the video.

1In Stop mode, press the MENU button.

Press the Cursor button to move to <Audio> and then press the ENTER button.

3Press the Cursor button to move to <AV-SYNC> and then press the

ENTER button.

4Press the Cursor , button to select the AV-SYNC Delay Time and then

press the ENTER button.

You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

Press the RETURN button to return to the previous level.

Press the EXIT button to exit the setup screen.

Setting the AV SYNC

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital

sound when watching movies at low volume at night.

1In Stop mode, press the MENU button.

Press the Cursor button to move to <Audio> and then press the ENTER button.

Press the Cursor button to move to <DRC> and then press the ENTER button.

4Press the Cursor , button to adjust the DRC.

When the Cursor button is pressed, the effect is greater, and when the Cursor button is

pressed, the effect is smaller.

Press the RETURN button to return to the previous level.

Press the EXIT button to exit the setup screen.

Setting the DRC (Dynamic Range Compression)

MOVE ENTER EXIT

CHANGE EXITRETURN

RETURN

MOVE ENTER EXITRETURN

MOVE SELECT EXITRETURN