Samsung AH68-01943R, AH68-01963S Before Using Your Home Theater, Disc Playback

ENG
2322
OPERATION
Before Using Your Home Theater
To Operate your Samsung TV and the Home Theater with the HT-X200's Remote Control
1Plug the main unit's power cord into the AC power supply.
■Before plugging your system into a main socket, you must check the voltage
setting (OPTIONAL). If the voltage of the socket does not correspond to the
setting on the rear of the unit, you may seriously damage your system.
2Press the TV button to set the remote to TV mode.
3Press the POWER button to turn on your Samsung TV
with this remote.
4Press the TV/VIDEO button to select VIDEO mode on your TV.
5Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6Press the FUNCTION button on the main unit or DVD button
on the remote to enable DVD playback.
VIDEO
Disc Playback
1Load a disc vertically into the Disc Insert Hole.
■
Insert a disc so that the label side faces forward.
■
Playback starts automatically.
2To eject the disc, press the EJECT button.
• Depending on the content of the disc, the initial screen may appear different.
• Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection
system) recommendations.
To stop playback, press the STOP button during playback.
■If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
■If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE ( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press the PLAY/PAUSE ()button during playback.
■To resume playback, press the PLAY/PAUSE ( ) button again.
DVD CD
The DVD Home Theater's remote can be used to control Samsung TVs.
ALL