ENG
CONNECTIONS
1514

Installing the Main Unit

Be careful not to scratch the surface the DVD Player when installing
the stand.
Do not turn the DVD Player left or right as it may separate it from the stand.
Method 1 : Installing the Stand so that the DVD Player Lays Flat.
Preparation
Disconnect the AC power cord from the AC outlet before installing the main unit.
Connect the cables before installation.
1Turn the stand counter-clockwise and pull it apart.
The DVD Player and stand are separated.
2Hold the DVD Player and stand as shown by the figure and turn
the right side of the stand upward so that it is slightly slanted.
3Insert the 2 stand anchors into the holes on the back of the
DVD Player.
4
Turn the right side of the stand clockwise to fix it to the back of the
DVD Player.
1 2 3 4
Method 2 : Installing the Stand so that the DVD Player Stands up.
Arranging the Cables
Preparation
Disconnect the AC power cord from the AC outlet before installing the main unit.
Connect the cables before installation.
1Turn the stand in the direction of the arrow and pull it apart.
The DVD player and stand are separated.
2Lift the right side of the stand so that it is slightly slanted.
3Insert the 2 stand anchors into the holes on the bottom of the
DVD Player.
4
Turn the right side of the stand clockwise to fix it to the bottom of the
DVD Player.
Use the cable tie to keep the cables together.
1 2 3 4