Athena Technologies 6050 specs

Display update rate:

Filtering:

°F/°C:

output:

-B Relay (time proportioning)

-F Current proportional

-S Pulsed voltage

-T Triac time proportional

Filtered LED display:

T/C linearization:

Connections:

Dimensions:

Mounting:

Weight:

5 times per second

Analog and digital filtering techniques increase stability of process and display.

Internal switch selection-- process, set point.

Heating only

SPST relay 7 Amps resistive at

120 Vac, 5 amp resistive at 240 Vac,

50 VA inductive.

4-20mADC into 500 Ohm max. For driving SCR power controllers.

20 Vdc pulsed time proportioning signal for driving solid state relays.

Solid state plug-in triac output. Rated 1 Amp holding & 10 amps inrush.

4 digits for process, 4 digits for parameters.

Continuously calculated and updated using rom based algorithm.

Inputs and outputs via barrier strips with U.L. approved locking terminals.

Front panel: 96mm X 96mm X 22mm

Case: 92mm X 92mm X 118mm

Depth behind panel: 96mm (approx. minus panel thickness)

Channel slides and screws 2 lb