Cub Cadet SLT1554, SLT1550 Choke Control, Ignition Switch Module, Brake Pedal, Deck Lift Lever

Page 10

Throttle Control Lever

The throttle control lever is located on the left side of the tractor’s dash panel. This lever controls the speed of the engine. When set in a given position, the throttle will maintain a uniform engine speed.

IMPORTANT: When operating the tractor with the cutting deck engaged, be certain that the throttle lever is always in the FAST (rabbit) position.

Choke Control

The choke control can be found on the left side of the dash panel and is activated by pulling the knob outward. Activating the choke control closes the choke plate on the carburetor and aids in starting the engine. Refer to Starting The Engine on page 13 of this manual for detailed starting instructions.

Fast

Position

Slow

Position

Ignition Switch Module

WARNING: Never leave a running machine unattended. Always disengage PTO, move shift lever into neutral position, set parking brake, stop engine and remove key to prevent unintended starting.

To start the engine, insert the key into the ignition switch and turn clockwise to the START position. Release the key into the NORMAL MOWING MODE position once the engine has fired.

To stop the engine, turn the ignition key counterclockwise to the STOP position. See Figure 3.

.ORMAL

-OWING -ODE

3TOP

0OSITION

3TART

0OSITION

Brake Pedal

The brake pedal is located on the right front side of the tractor above the drive pedal along the running board. The brake pedal can be used for sudden stops or setting the parking brake.

NOTE: The brake pedal must be fully depressed to activate the safety interlock switch when starting the tractor.

Seat Adjustment Lever

To adjust the seat forward or backward, slide the seat adjustment lever to the left and reposition the seat to the desired position. Once a comfortable position is found, release the seat adjustment lever to lock the seat in place. Refer to Seat Adjustment on page 18 of this manual for more detailed instructions.

Deck Lift Lever

Found on your tractor’s right fender, the deck lift lever is used to change the height of the cutting deck. To use, move the lever to the left, then place in the notch best suited for your application.

Figure 3

IMPORTANT: Prior to operating the tractor, refer to both Safety Interlock Switches on page 12 and Starting The Engine on page 13 of this manual for detailed instructions regarding the Ignition Switch Module and operating the tractor in REVERSE CAUTION MODE.

Drive Pedal

The drive pedal is located on the right side of the tractor, along the running board. Depress the upper portion of the drive pedal forward to cause the tractor to travel forward. Depress the lower portion of the drive pedal with the ball of your right foot (NOT your heel) to cause the tractor to travel in reverse. Ground speed is also controlled with the drive pedal. The further forward or rearward that the pedal is pivoted, the faster the tractor will travel. The pedal will return to its original position when it’s not depressed.

IMPORTANT: Always set the parking brake when leaving the tractor unattended.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationSlope Operation Towing Page Slope Gauge —Shipping Brace Removal Gas and Oil Fill-upAttaching The Steering Wheel Know Your Lawn Tractor Choke Control Ignition Switch ModuleSeat Adjustment Lever Brake PedalCruise Control Lever Electric PTO Blade Engage KnobParking Brake Lever Reverse Caution Mode Safety Interlock SwitchesOperating Your Lawn Tractor Starting the Engine Setting the Gauge WheelsStopping the Engine Driving The Tractor Setting The Cruise ControlEngaging the Parking Brake Driving On SlopesMoving The Tractor Manually Using the Deck Lift LeverOperating the Headlights Engaging the PTOMowing Front To Rear Leveling the DeckSide to Side Steering Adjustment Parking Brake AdjustmentSeat Adjustment Engine Oil Maintaining Your Lawn TractorEngine Checking the Oil LevelChanging the Oil Filter Changing the Engine OilDraining the Oil Re-filling the Crankcase with OilAir Filter PrecleanerService Paper Element Spark PlugsFuel Filter Cleaning the Engine And DeckSmart Jet Lubrication CarburetorAdjustment Fuse ServiceTires Cutting BladesChanging The Transmission Drive Belt BatteryCutting Deck Removal Jump StartingHydrostatic Transmission Changing the Deck BeltSLT1550 OFF-SEASON Storage Maintenance Chart Maintenance LOG Troubleshooting Trouble Possible Causes Corrective ActionAttachments & Accessories AttachmentsReplacement Parts SLT1050 SLT1554Specifications SLT1550 SLT1554 CapacitiesPage MANUFACTURER’S Warranty Coverage MANUFACTURER’S Warranty Coverage U.S.A CUB Cadet LLC, P.O. BOX 361131 CLEVELAND, Ohio

SLT1550, SLT1554, SLT1554, SLT1550 specifications

The Cub Cadet SLT1550 and SLT1554 are two impressive lawn tractors known for their powerful performance, innovative technologies, and robust design. Both models are tailored for homeowners who demand efficiency and reliability in maintaining their yards.

The SLT1550 is equipped with a reliable 50-inch cutting deck, while the SLT1554 features a slightly larger 54-inch deck, providing greater coverage for larger lawns. These cutting decks are designed for an even and clean cut, enhancing the overall appearance of your lawn. The decks are also constructed with durable materials that ensure long-lasting performance, resisting wear and tear even under heavy use.

One of the standout features of both models is the powerful engine. The SLT1550 is powered by a reliable Kohler engine, offering 23 horsepower, while the SLT1554 is equipped with a similar-grade engine. This powerful drive enables both tractors to tackle tough terrain and thick grass with ease, significantly reducing mowing time and effort.

Another significant aspect of these lawn tractors is their Hydrostatic transmission. This technology allows for smooth, automatic shifting without the need for manual gear changes, providing an intuitive driving experience. Users can easily adjust their speed while maintaining control over the tractor, making it ideal for both novice and experienced users.

Comfort and ergonomics are key considerations in the design of the SLT1550 and SLT1554. Both models feature an adjustable high-back seat, ensuring that operators can find the optimal position for their comfort during extended mowing periods. Additionally, the tractors are equipped with a user-friendly dashboard that includes essential indicators such as fuel level and engine temperature, allowing for easy monitoring while mowing.

For versatility, both models support various attachments, such as baggers, mulchers, and snow removal equipment, making them suitable for year-round use. The ability to adapt the tractor for different seasons adds significant value for homeowners who want a multi-functional machine.

Safety is also a priority, as both models come with essential safety features, including a terrain-gripping tire design, which enhances stability during operation on uneven surfaces. The tractors also incorporate a seat switch that ensures the engine shuts off if the operator leaves the seat while the mower is engaged.

In summary, the Cub Cadet SLT1550 and SLT1554 deliver a harmonious blend of power, comfort, and versatility, making them excellent choices for homeowners looking to maintain their lawns with ease and efficiency.
Top Page Image Contents