Cub Cadet SLT1550, SLT1554, SLT1554, SLT1550 Electric PTO Blade Engage Knob, Cruise Control Lever

Page 11

Systems Indicator Monitor / Hour Meter

42.0

LCD

Located in the center of the tractor’s console, the systems indicator monitor records, and displays on its LCD, hours of tractor operation whenever the ignition key is rotated out of the STOP position.

The Indicator Monitor will also remind the operator of maintenance intervals for changing the engine oil. The LCD will alternately flash the recorded hours, “CHG” and “OIL” for five minutes, after every 50 hours of recorded operation elapse. The maintenance interval lasts for two hours (from 50-52, 100-102, 150-152, etc.). The LCD will also flash as described above for five minutes every time the tractor’s engine has been started during this maintenance interval. Before the interval expires, change the crankcase oil level as instructed in this Operator’s Manual.

Brake

If the Brake light illuminates when attempting to start the tractor’s engine, depress the brake pedal.

PTO (Blade Engage)

If the PTO light illuminates when attempting to start the tractor’s engine, move PTO lever into the disengaged (OFF) position.

Oil

It is normal for the Oil light to illuminate while the engine is cranking during start-up, but if it illuminate’s during operation, while the engine is running, stop the tractor immediately and check the crankcase oil level as instructed in this Owner’s Manual.

Battery

It is normal for the Battery light to illuminate while the engine is cranking during start-up, but if it illuminate’s during operation, while the engine is running, the battery is in need of a charge or the engine’s charging system is not generating sufficient amperage. Refer to the MAINTENANCE section of this manual for the proper battery charging procedure or have the charging system checked by your Cub Cadet dealer.

Electric PTO /

Blade Engage Knob

To engage the power to the cutting deck or other (separately

available) attachments, pull outward on the PTO/Blade Engage knob. Push the PTO/ Blade Engage knob inward to disengage the power to the

cutting deck other (separately available) attachments.

NOTE: The PTO/Blade Engage knob must be in the disengaged (OFF) position when starting the engine.

Cruise Control

Lever

The cruise control lever is located on the tractor dash

panel, below the steering wheel. Push the cruise control lever downward while traveling forward at a desired speed. While holding the lever down, release pressure from the drive pedal.

This will engage the cruise control and allow the tractor to remain at that speed without applying pressure to the drive pedal. Depress the brake pedal or the drive pedal to deactivate cruise control. Refer to page 14 for detailed instructions regarding cruise control.

NOTE: Cruise control can NOT be engaged at the tractor’s fastest ground speed. If the operator should attempt to do so, the tractor will automatically decelerate to the fastest optimal mowing ground speed.

Parking Brake

Lever

To set the parking brake, fully depress

the brake pedal and

push the parking brake lever down. Hold the lever down while taking your foot off the brake pedal. Both the parking lever and the brake pedal will then stay depressed. To release the parking brake, depress the brake pedal slightly. The parking brake lever will then return to its original position.

NOTE: The parking brake must be set if the operator leaves the seat with the engine running or the engine will automatically shut off.

IMPORTANT: Always set the parking brake when leaving the tractor unattended.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operator’s Manual Table of Contents General Operation Important Safe Operation PracticesSlope Operation Towing Page — Slope GaugeAttaching The Steering Wheel Gas and Oil Fill-upShipping Brace Removal Know Your Lawn Tractor Brake Pedal Ignition Switch ModuleSeat Adjustment Lever Choke ControlParking Brake Lever Electric PTO Blade Engage KnobCruise Control Lever Operating Your Lawn Tractor Safety Interlock SwitchesReverse Caution Mode Stopping the Engine Setting the Gauge WheelsStarting the Engine Driving On Slopes Setting The Cruise ControlEngaging the Parking Brake Driving The TractorEngaging the PTO Using the Deck Lift LeverOperating the Headlights Moving The Tractor ManuallyMowing Side to Side Leveling the DeckFront To Rear Seat Adjustment Parking Brake AdjustmentSteering Adjustment Checking the Oil Level Maintaining Your Lawn TractorEngine Engine OilRe-filling the Crankcase with Oil Changing the Engine OilDraining the Oil Changing the Oil FilterSpark Plugs PrecleanerService Paper Element Air FilterSmart Jet Cleaning the Engine And DeckFuel Filter Carburetor LubricationAdjustment Cutting Blades ServiceTires FuseJump Starting BatteryCutting Deck Removal Changing The Transmission Drive BeltChanging the Deck Belt Hydrostatic TransmissionSLT1550 OFF-SEASON Storage Maintenance Chart Maintenance LOG Trouble Possible Causes Corrective Action TroubleshootingAttachments Attachments & AccessoriesSLT1050 SLT1554 Replacement PartsSLT1550 SLT1554 Capacities SpecificationsPage MANUFACTURER’S Warranty Coverage MANUFACTURER’S Warranty Coverage U.S.A CUB Cadet LLC, P.O. BOX 361131 CLEVELAND, Ohio

SLT1550, SLT1554, SLT1554, SLT1550 specifications

The Cub Cadet SLT1550 and SLT1554 are two impressive lawn tractors known for their powerful performance, innovative technologies, and robust design. Both models are tailored for homeowners who demand efficiency and reliability in maintaining their yards.

The SLT1550 is equipped with a reliable 50-inch cutting deck, while the SLT1554 features a slightly larger 54-inch deck, providing greater coverage for larger lawns. These cutting decks are designed for an even and clean cut, enhancing the overall appearance of your lawn. The decks are also constructed with durable materials that ensure long-lasting performance, resisting wear and tear even under heavy use.

One of the standout features of both models is the powerful engine. The SLT1550 is powered by a reliable Kohler engine, offering 23 horsepower, while the SLT1554 is equipped with a similar-grade engine. This powerful drive enables both tractors to tackle tough terrain and thick grass with ease, significantly reducing mowing time and effort.

Another significant aspect of these lawn tractors is their Hydrostatic transmission. This technology allows for smooth, automatic shifting without the need for manual gear changes, providing an intuitive driving experience. Users can easily adjust their speed while maintaining control over the tractor, making it ideal for both novice and experienced users.

Comfort and ergonomics are key considerations in the design of the SLT1550 and SLT1554. Both models feature an adjustable high-back seat, ensuring that operators can find the optimal position for their comfort during extended mowing periods. Additionally, the tractors are equipped with a user-friendly dashboard that includes essential indicators such as fuel level and engine temperature, allowing for easy monitoring while mowing.

For versatility, both models support various attachments, such as baggers, mulchers, and snow removal equipment, making them suitable for year-round use. The ability to adapt the tractor for different seasons adds significant value for homeowners who want a multi-functional machine.

Safety is also a priority, as both models come with essential safety features, including a terrain-gripping tire design, which enhances stability during operation on uneven surfaces. The tractors also incorporate a seat switch that ensures the engine shuts off if the operator leaves the seat while the mower is engaged.

In summary, the Cub Cadet SLT1550 and SLT1554 deliver a harmonious blend of power, comfort, and versatility, making them excellent choices for homeowners looking to maintain their lawns with ease and efficiency.
Top Page Image Contents