Cub Cadet E977C, 977A manual Important Safe Operation Practices, General Operation

Page 3

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol—HEED ITS WARNING.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

WARNING: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

General Operation

1.Read this operator’s manual carefully in its entirety before attempting to assemble this machine. Read, understand, and follow all instructions on the machine and in the manual(s) before operation. Be completely familiar with the controls and the proper use of this machine before operating it. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.This machine is a precision piece of power equipment, not a plaything. Therefore, exercise extreme caution at all times. Your unit has been designed to perform one job: to mow grass. Do not use it for any other purpose.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent. Only responsible individuals who are familiar with these safe operation rules should use this machine.

4.Thoroughly inspect the area where equipment is to be used. Remove all stones, sticks, wire, bones, toys and other foreign objects which could be tripped over or picked up and thrown by the blade. Thrown objects can cause serious personal injury. Plan your mowing pattern to avoid discharge of material toward roads, sidewalks, bystanders and the like. Also, avoid discharging material against a wall or obstruction which may cause discharged material to ricochet back toward the operator.

5.To help avoid blade contact or a thrown object injury, stay in the operator zone behind the handles and keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

6.Always wear safety glasses to protect your eyes during equipment operation and while performing an adjustment or repair. Thrown objects which ricochet can cause serious injury to the eyes.

7.Wear sturdy, rough-soled work shoes and close- fitting slacks and shirts. Shirts and pants that cover the arms and legs and steel-toed shoes are recommended. Never operate this machine in bare feet, sandals, slippery or light weight (e.g. canvas) shoes.

8.Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade can amputate hands and feet.

9.A missing or damaged discharge cover can cause blade contact or thrown object injuries.

10.Many injuries occur as a result of the mower being pulled over the foot during a fall caused by slipping or tripping. Do not hold on to the mower if you are falling; release the handle immediately.

11.Never pull the mower back toward you while you are walking. If you must back the mower away from a wall or obstruction first look down and behind to avoid tripping and then follow these steps:

a.Step back from the mower to fully extend your arms.

b.Be sure you are well balanced with sure footing.

c.Pull the mower back slowly, no more than half way toward you.

d.Repeat these steps as needed.

5.Do not operate the mower while under the influence of alcohol or drugs.

6.Do not engage the self-propelled mechanism on units so equipped while starting engine.

7.The blade control handle is a safety device. Never attempt to bypass its operation. Doing so makes the safety device inoperative and may result in personal injury through contact with the rotating blade. The blade control handle must operate easily in both directions and automatically return to the disengaged position when released.

8.Never operate the mower in wet grass. Always be sure of your footing. A slip and fall can cause serious personal injury. If you feel you are losing your footing, release the blade control handle

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operator’s Manual Table of Contents General Operation Important Safe Operation PracticesDo Not ServiceSlope Operation ChildrenYour Responsibility General ServiceSlope Gauge Loose Parts in Carton Before AssemblyAssembling Your Lawn Mower Removing Unit From CartonAttaching Starter Rope Attaching The Grass BagAttaching Side Discharge Chute Know Your Lawn Mower Starting Engine Operating Your Lawn MowerGas & Oil Fill-Up Before Starting MowerBagging Grass Clippings Using Your Lawn MowerStopping Engine MulchingShift Lever Cable Engine AdjustmentsCutting Height Drive Clutch ControlLubrication Cleaning MowerMaintaining Your Lawn Mower Engine CareBlade Care Drive Belt ReplacementWheel Hex Bolt Cutting Height Adjustment Storing Your Lawn Mower Replacing Battery PackReplacing Rear Flap In-line FuseProblem Cause Remedy TroubleshootingParts List for Models 977 & E977 Models 977 & E977 Models 977 & E977 Part Description Model E977 Engine Manual for Kawasaki Engine Emission Control Information Fuel InformationExhaust Emission Control System Tampering with Emission Control System Prohibited Installation InstructionsMaintenance and Warranty Engine Emissions Compliance PeriodEngine Serial Number Location of Safety Related LabelsTune-up Specifications General InformationPreparation Fuel And Oil RecommendationsStarting OperatingStopping Oil Change AdjustmentEngine Speed Adjustment Oil Level CheckCooling System Cleaning Air Cleaner ServiceFoam Element Storage Paper ElementRecommended Spark Plug Page Troubleshooting Guide SpecificationsEnvironmental Protection Page Limited Liability MANUFACTURER’S Limited Warranty for

E977C, 977A specifications

The Cub Cadet 977A and E977C are powerful lawn care machines designed for both residential and commercial use. These models stand out for their robust construction, reliability, and advanced features, making them popular choices among homeowners and professional landscapers alike.

One of the main features of the Cub Cadet 977A is its powerful engine. Equipped with a high-performance, overhead valve (OHV) engine, it ensures efficient power output and better fuel economy. This engine configuration allows for smoother operations and greater durability, even in tough mowing conditions. Similarly, the E977C model offers a strong engine option, optimized for both performance and lower emissions, promoting environmental responsibility.

Both models feature a cutting deck with a generous width that enhances productivity. The Cub Cadet 977A comes with a 54-inch cutting deck, while the E977C is fitted with a versatile 60-inch deck. The larger cutting area allows users to cover more ground in less time, making them ideal for larger lawns and landscapes. Additionally, they offer multiple cutting height adjustments, so users can customize their mowing height according to their specific lawn care needs.

The innovative Turf Saver tires provide excellent traction and minimize lawn damage during operation. The tread design helps in maneuverability, making it easier to navigate around obstacles and tight spaces. Moreover, the ergonomic controls and comfortable seating enhance the driver’s experience, allowing for long periods of mowing without discomfort.

Both the 977A and E977C incorporate advanced technologies such as hydrostatic transmission for seamless speed control. This feature ensures smooth acceleration and deceleration, allowing the operator to focus on precision cutting rather than shifting gears. The models also include a rugged chassis design, which provides stability when tackling uneven terrains.

For ease of maintenance, both models are equipped with easy-access service points, simplifying routine checks and oil changes. Furthermore, they are compatible with various attachments and accessories, like baggers and mulch kits, making them versatile for different lawn care tasks.

In summary, the Cub Cadet 977A and E977C are distinguished by their powerful engines, wide cutting decks, advanced transmission systems, and ergonomic designs. These characteristics make them effective, efficient, and easy to use, positioning them as excellent investments for anyone looking to maintain a pristine lawn or landscape.
Top Page Image Contents