Tascam DA-40 Specifications, Audio specifications, Specifications, Physical specifications

6 - Specifications

6.1	Audio specifications
Tape Speed		8.15 mm/s (SP mode)
		4.075 mm/s (LP mode)
Recording time (with 120-		120 minutes (SP mode)
minute cassette)
		240 minutes (LP mode)
Head drum speed		2,000 rpm (SP mode)
		1,000 rpm (LP mode)
Fast wind time (forward		60 seconds end-to-end with
and rewind)		120-minute tape
Sampling frequency		44.1 kHz, 48 kHz
		32 kHz (LP mode)
Recording resolution		16-bit linear (SP mode)
		12-bit non-linear (LP mode)
Frequency response		20 Hz to 20,000 Hz (SP mode)
±0.5 dB
		20 Hz to 14,500 Hz (LP mode)
S/N ratio		> 92 dB
Dynamic range		>93 dB
Total harmonic distortion		<0.005% (SP mode)
(1 kHz @ FS – 0.1 dB)
		<0.075% (LP mode)
Channel separation		>90 dB (1kHz @ FS)
Wow and flutter		Unmeasurable (<0.001%)
6.2	I/O specifications
Analog inputs (balanced		Nominal input level +4dBu
XLR-3-31 type)		(FS=–16 dBu)
		Maximum input level +20 dBu
		Nominal impedance >10 kΩ
Analog inputs (unbal-		Nominal input level –10dBV
anced RCA)		Maximum input level +6 dBV
		(2Vrms)
		Nominal impedance >50 kΩ
Analog outputs (balanced		Nominal output level +4dBu
XLR-3-32 type)		(FS=–16 dBu)
		Maximum output level +20 dBu
		Nominal impedance <100 Ω

Analog outputs (unbal-	Nominal output level –10 dBV
anced RCA)	Maximum output level +6 dBV
	(2 Vrms)
	Nominal impedance <1k Ω
Headphone 1/4-inch	(2 x 50 mW into 32 Ω)
stereo jack
Digital input AES/EBU	AES3-1992 (Type I)a or
(balanced XLR-3-31 type)	IEC60958 format (Type II)
	(auto-detect)
Digital input COAXIAL	AES3-1992 (Type I)a or
(unbalanced RCA)	IEC60958 format (Type II)
	(auto-detect)
Digital output AES/EBU	AES3-1992 (Type I)a or
(balanced XLR-3-32 type)	IEC60958 format (Type II)
	(menu-selectable)
Digital output COAXIAL	AES3-1992 (Type I)a or
(unbalanced RCA)	IEC60958 format (Type II)
	(menu-selectable)
Parallel I/O port	15-pin ’D’-sub connector
REMOTE CONTROL	For use with RC-D45 only
3.5 mm mini-jack

a.IEC-60958 Type I (AES3-1992) is a standard for broadcasting studios (professional). It can- not be used for connecting consumer products. IEC-60958 Type II (SPDIF) is a standard for consumer products.

6.3Physical specifications

Voltage requirements:	USA/Canada 120 VAC ‘60 Hz
	Europe/UK 230 VAC @ 50 Hz
	Australia 240 VAC @ 50 Hz
Power consumption	21 W
Weight	8 kg (17.6 lbs)
Dimensions (w x h x d)	482 x 150.5 x 364 mm (19 x 5.9
	x 14.3 in
Supplied accessories	Rack mounting kit
Optional accessories	RC-D45 wired remote control
	unit

Changes to specifications and features may be made without notice or obligaiton.

30 TASCAM DA-40