Cub Cadet 23HP Z-Force 50 service manual Forward

Page 3

FORWARD

The Hydrostatic Zero-Turn Riding Mower provides superb maneuverability and mid-mount cut- ting. The machine incorporates many safety features that should be studied by all operators before use. The list of safety precautions should receive particular attention.

This manual presents all of the operating and maintenance instructions necessary to keep your mower at peak efficiency. If operated and maintained properly, your mower will give dependable service.

CAUTION:

Only thoroughly trained persons should operate and maintain this mower. This machine can cause serious injury to anyone who mis- uses it and does not understand its operation. For their personal safety, all operators are required to read this entire manual before operating the mower.

Hazard control and accident prevention are partially dependent upon the design and configuration of the equipment. Awareness, concern, prudence and proper training of the personnel involved in the operation, transport, maintenance and storage of the equip- ment, are essential for hazard control and accident prevention.

NOTE: The engine manufacturer is responsible for all engine-related issues with regards to performance, power-rating, specifications, warranty and service. Please refer to the engine manufacturer’s owner’s/operator’s manual, packed seperately with your unit, for more information.

3

Image 3
Contents Hydrostatic Zero-Turn Residential Riding Mower Table of Contents Forward Safe Operation Practices General Safety OperationsSlope Operation Service Routing Safety Decals and LabelsSpecifications When Mowing Operating InstructionsGeneral To Mow Grass and Produce a Striped Pat- tern Safety Awareness when MowingSteering Levers Brake Check the fluid levels and tires Initial AdjustmentsInitial Operation Zero Turn Break-In And Operating ProceduresLubricate all fittings listed in the mainte- nance section OrientationStart the Engine Maintenance Service Cleaning your DeckParking the Mower Mower Deck Removing the Mower DeckChanging a Blade Changing the Blade Drive Belts Changing the Spindle AssemblyHydrostatic Drive System Sharpening the BladeSpecific Gravity Freezing Temp F Battery RemovalInstalling the Battery Electrical CircuitPage Tires BrakesInflation Pressure Storage Hydraulic SystemEvery 50 Hour Checks Maintenance ScheduleDaily Checks Every 25 Hour ChecksIf Mower is so equipped OIL ChartEngine RPM Check and Adjustment High Speed Tracking AdjustmentDeck Center Anti-Scalp Roller Deck Corner Ball Wheel Roller SettingsLap Bar Adjustment Deck leveling ProcedureAdjust as necessary to 8-10 psi Wiring Diagram Slope Gauge Maintenance Record Maintenance Record Maintenance Record MANUFACTURER’S Limited Warranty for How to obtain serviceItems not covered