Cub Cadet 19HP Enforcer 44, 21HP Enforcer 48, 23HP Enforcer 54 service manual Steering Levers

Page 12

Steering Levers

Figure. 3

Deck Lift Pedal

4.Electric Blade Clutch Switch: (See Figure 1.) Located on the right side of the mower beside the ignition switch. This is an “on/off” push-pull switch that controls the electric blade clutch which supplies power to the cut- ting blades through the PTO. The switch must be turned off to start the engine and should be turned off for safety any time another per- son approaches the mower or the mowing deck is raised to the transport position. Power to the electric clutch will also be cut off if the operator leaves the operator’s seat.

5.Parking Brake: (See Figure 3.) Located on the left side of the traction unit. The handle is an overcenter lever which applies the drum brakes on the drive wheels when the handle is pulled to the rear. The brake must be engaged in order to start the engine.

6.Deck Lift Pedal: (See Figure 3.) Located on the panel in front of the seat. Raise the mow- ing deck to the transport position, by pushing the upper part of the pedal. To lower the mow- ing deck, push on the upper part of the pedal and lower it to the desired position.

7.Fuel Shutoff Valve: (See Figure 4.) Located on top of each fuel tank. When turned in a clockwise direction until it stops, it will shut off the flow of fuel to the engine. When turned in a counterclockwise direction it will open and allow fuel to flow to the engine. Close this valve if you are not going to run the mower for a period of 30 minutes or more to prevent flooding the engine.

Figure. 4

 

 

Fuel Shutoff Valve

8.Seat Position Adjustment Lever: The Seat Position Adjustment Lever is located beneath the seat. The Seat Position Adjustment Lever is used to move the seat forward and back- ward. To place the seat in the desired position pull the seat adjustment lever to the left then push the seat forward or back to the desired position. Release the lever so the seat will lock in place.

9.Weight Adjustment Lever: The weight adjustment lever is located on the right side of the seatback and incorporates three settings: upper is 110 lbs, middle is 195 lbs, and lower is 285 lbs.

10.Seatback Recline Knob: The seatback recline knob is located on the right side between the seat back and seat bottom. Turning it clockwise adds additional recline up to 10 degrees.

11.Hour Meter: (See Figure 1) Located on the right side of the mower behind the ignition switch. The hour meter displays running time.

Note: An optional meter provides engine speed (RPM), service reminders (oil, lube), and running time (hours).

12.Choke Lever: (See Figure 2) The Choke knob is located on the left side control panel next to the operator’s seat. Having the Choke in the ON (up) position helps the engine to start during initial start-up. During normal operation the Choke should be in the OFF (down) position.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Hydrostatic Zero-Turn Commercial Riding Mower Table of Contents Foreword General Safety Operations Safe Operation PracticesSlope Operation Service Related to BatteriesRelated to Fuel Suspension SeatTowing Safety Decals and Labels Assemble Chute Deflector to this Unit Before OperatingSpecifications When Mowing Operating InstructionsGeneral Safety Awareness when Mowing To Mow Grass and Produce a Striped Pat- ternSteering Levers Initial Adjustments Check the fluid levels and tiresZero Turn Break-In And Operating Procedures Lubricate all fittings listed in the mainte- nance sectionOrientation Initial OperationStart the Engine Mower Cutting Blades Parking the MowerMaintenance Service Cleaning your DeckMower Deck Removing the Mower DeckChanging a Blade Sharpening the BladeChanging the Spindle Assembly Battery RemovalHydrostatic Drive System Electrical CircuitInstalling the Battery Jump StartingTires BrakesInflation Pressure To Put the Mower Back in Service Hydraulic SystemStorage Maintenance Schedule OIL Chart If Mower is so equippedHigh Speed Tracking Adjustment Engine RPM Check and AdjustmentDeck Corner Ball Wheel Roller Settings Lap Bar AdjustmentDeck Center Anti-Scalp Roller Deck leveling Procedure Wiring Diagram Gaugeslope Maintenance Record Page U.S.A Canada

19HP Enforcer 44, 21HP Enforcer 48, 23HP Enforcer 54 specifications

The Cub Cadet Enforcer series is a robust line of ride-on lawn mowers designed for superior performance, versatility, and user convenience. Three prominent models in this series include the 19HP Enforcer 44, the 21HP Enforcer 48, and the 23HP Enforcer 54. Each of these mowers showcases a unique set of features tailored to meet various yard care needs.

The 19HP Enforcer 44 is equipped with a powerful 19 horsepower engine, offering reliable performance for smaller to mid-sized lawns. This model features a 44-inch cutting deck, allowing for efficient mowing without compromising fuel efficiency. The mower's hydrostatic transmission provides smooth acceleration and easy maneuverability, making it ideal for navigating around obstacles. Key technologies include Cub Cadet's signature AeroForce cutting system, which enhances grass collection and creates an immaculate finish.

Next, the 21HP Enforcer 48 takes performance a step further. With its 21 horsepower engine, this mower is designed for those who require both power and precision. The 48-inch cutting deck provides a broader swath of grass, enabling homeowners to tackle larger lawns with ease. The Enforcer 48 also incorporates a heavy-duty frame for increased durability and stability. Ergonomically designed controls ensure a comfortable user experience, while the cutting height can be easily adjusted for various lawn conditions.

Lastly, the 23HP Enforcer 54 stands out with its 23 horsepower engine and expansive 54-inch cutting deck, making it ideal for larger properties and commercial mowing tasks. This model is equipped with advanced features such as a reinforced cutting deck and a powerful blade engagement system, ensuring exceptional performance in tough mowing conditions. The Enforcer 54 also benefits from an intuitive dashboard, where users can monitor vital mower parameters and maintain optimal performance with ease.

All three mowers share common characteristics, including a robust design built to withstand the rigors of regular use. They also feature an easy-to-access fuel system and tool-free maintenance points, simplifying upkeep for owners. With their powerful engines, advanced cutting technology, and user-friendly features, the Cub Cadet Enforcer series delivers a reliable solution for all lawn care needs, making it a preferred choice for homeowners and professionals alike.
Top Page Image Contents