Cub Cadet 1212 manual Adjustments, Mowing, Leveling the Deck

Page 14

•Pull the PTO knob outward into the engaged (ON) position. See Figure 7.

•Keep the throttle lever in the FAST (rabbit) position for the most efficient use of the cutting deck and other attachments.

•The operator must remain in the tractor seat at all times. If the operator should leave the seat without pushing the PTO knob inward into the disengaged (OFF) position, the tractor’s engine will shut off.

IMPORTANT: The PTO knob cannot be in the engaged (ON) position when the tractor is driving in the reverse direction. The PTO knob must be in the disengaged (OFF) position when the shift lever is in REVERSE or the PTO will automatically shut off. Refer to SAFETY INTERLOCK SWITCHES in this section.

MOWING

This tractor is equipped with one of Cub Cadet’s high quality cutting decks. The following information will be helpful when using the cutting deck with your tractor.

WARNING: To avoid possible injury, do not allow anyone in the area of the tractor while mowing. Even if the area to be mowed has been cleared of foreign objects, small objects may be picked up and discharged by the mower.

WARNING: Never direct the discharge of material toward bystanders or allow anyone near the machine while in operation.

•For best results it is recommended that the first two laps should be cut with the discharge thrown towards the center. After the first two laps, reverse the direction to throw the discharge to the outside for the balance of cutting. This will give a better appearance to the lawn.

•Do not cut the grass too short. Short grass invites weed growth and yellows quickly in dry weather.

•Mowing should always be done with the engine at full throttle.

•Do not mow at high ground speed, especially if a mulch kit or grass collector is installed.

•Under heavier conditions it may be necessary to go back over the cut area a second time to get a clean cut.

•Do NOT attempt to mow heavy brush and weeds and extremely tall grass. Your tractor is designed to mow lawns, NOT clear brush.

•Keep the blades sharp and replace the blades when worn. Refer to the MAINTENANCE section of this manual for proper blade sharpening instructions.

SECTION 9: ADJUSTMENTS

LEVELING THE DECK

WARNING: Cutting blades are sharp. Always protect your hands by wearing heavy leather work gloves to grasp blades.

NOTE: Check the tractor’s tire pressure before performing any deck leveling adjustments. Refer to TIRES in the maintenance section of this manual for further information regarding tire pressure.

Front to Rear

The front of the cutting deck is supported by a stabilizer bar that can adjusted to level the deck from front to rear. The front of the deck should be 1/4" to 3/8" lower than the rear of the deck. Adjust if necessary as follows:

WARNING: Turn the tractor’s engine off, remove the key from the ignition switch and apply the tractor’s parking brake before making any adjustments to the cutting deck.

•With the tractor parked on a firm, level surface, place the lift lever in the top notch (highest position) and rotate the blade nearest the discharge chute so that it’s parallel with the tractor.

•Measure the distance from the front of the blade tip to the ground and the distance from the rear of the blade tip to the ground. The first measurement taken should be between 1/4" and 3/8" less than the second measurement. Determine the approximate distance necessary for proper adjustment and proceed, if necessary, to the next step.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Important Read Safety Rules and Instructions Carefully CUB Cadet CORP. P.O. BOX 368023 CLEVELAND, OhioFinding Your Model Number Table of ContentsCalling Warranty Service Important Safe Operation Practices General OperationDo not ServiceSlope Operation ChildrenSafety Labels found on your unit GaugeSlope Tractor SET-UP Attachments & AccessoriesAttaching the Battery Cables GAS and OIL FILL-UPControls Throttle Control Lever Ignition SwitchIndicator Monitor / Hour Meter Choke ControlDrive Pedal Electric PTO Power TAKE-OFF KnobLift Lever Parking Brake ButtonOperation Seat Adjustment LeverSafety Interlock Switches Cruise Control ButtonStopping the Engine Setting the Cutting HeightStarting the Engine Driving the TractorDriving on Slopes Setting the Cruise ControlUsing the Lift Lever Operating the HeadlightsLeveling the Deck AdjustmentsMowing Side to Side Carburetor Adjustment Seat AdjustmentSteering Adjustment Engine MaintenanceBrake Adjustment Cleaning the Engine and Deck Cutting Deck Removal 46-inch deck shownChanging the Deck Belts Inch and 50-inch decksChanging the Transmission Drive Belts Upper Drive Belt Battery FuseTires Cutting BladesLubrication Troubleshooting Guide Trouble Possible Corrective Action CausesModel Part DescriptionGreen Blue Model Tractor Body 751-0659 Fuel TankModel Lift Assembly 3126 Steering Assembly 731-2296 Steering Wheel Insert826 Drive System 783-0669 Idler BracketModel Two-speed Transmission Model Power Take-off Systems Model Inch Cutting Deck Engine Accessories Labels MANUFACTURER’S Limited Warranty for

1212 specifications

The Cub Cadet 1212 is a compact lawn tractor that stands out for its powerful performance, ease of use, and innovative features designed for homeowners and gardening enthusiasts. Built for durability and versatility, the 1212 combines traditional craftsmanship with modern technology, making it an ideal choice for maintaining residential landscapes.

At the heart of the Cub Cadet 1212 is its robust Kohler engine, which typically boasts around 12 horsepower. This engine delivers exceptional torque and reliability, allowing users to tackle a variety of tasks, from mowing the lawn to hauling light loads. The machine's hydrostatic transmission provides smooth, variable speed control, enabling operators to maneuver with precision and minimal effort. This feature significantly enhances the user experience, especially when navigating tight corners and uneven terrain.

One of the standout features of the Cub Cadet 1212 is its 38-inch cutting deck. This mid-sized deck is perfect for small to medium-sized yards. The deck is designed for easy height adjustment, allowing users to customize their mowing height for different grass types and seasonal conditions. Furthermore, the deck incorporates a deck wash system, which makes maintenance simple by enabling easy cleaning after mowing sessions.

The Cub Cadet 1212 is equipped with ergonomic controls that enhance comfort during operation. The soft-touch steering wheel and comfortable seating ensure that users can operate the tractor for extended periods without discomfort. Additionally, the easy-to-reach controls allow for a seamless transition between different functionalities, such as switching from mowing to attaching optional accessories like baggers or snow throwers.

In terms of build quality, the 1212 demonstrates robust construction featuring a sturdy steel frame designed to withstand the rigors of regular use. This durability is complemented by a reliable starting system, often featuring electric start options for added convenience.

Another critical aspect is the innovative design that caters to safety, with features like safety switches that prevent the tractor from being operated when the driver is not in a seated position. This commitment to user safety reflects Cub Cadet's dedication to providing a reliable and enjoyable mowing experience.

In summary, the Cub Cadet 1212 is a versatile and dependable lawn tractor equipped with a variety of features that prioritize performance, comfort, and safety. Its combination of a powerful engine, user-friendly controls, and durable construction makes it an excellent choice for homeowners looking to simplify their lawn care routines. Whether for mowing, hauling, or additional landscaping tasks, the Cub Cadet 1212 continues to be a favored model among gardening enthusiasts.
Top Page Image Contents