Cleaning the Engine and Deck

Any fuel or oil spilled on the machine should be wiped off promptly. Do NOT allow grass, leaves, and dirt to accumulate around the cooling fins of the engine or on any other part of the machine, especially the pulleys and other moving parts.

Clean the underside of the deck with a wisk broom, putty knife or forced air after each mowing.

CUTTING DECK REMOVAL (46-inch deck shown)

IMPORTANT: The use a pressure washer or garden hose to clean your tractor is NOT recommended. It may cause damage to electrical components, spindles, pulleys, bearings or the engine. The use of water will result in a shortened life of the tractor and reduce its serviceability.

Deck Lift Arms

To Lift Assembly

Deck Support Pins

NOTE: Deck belt and other tractor components not shown for clarity.

PTO Idler Pulley Bracket (mounted on tractor)

Figure 15

PTO Idler Pulley

PTO Belt

Electric PTO Clutch

Deck

Stabilizer

Bracket

Hooks

Front of Tractor

Deck Stabilizer Rod

WARNING: Before performing any maintenance, place the PTO knob into the disengaged (OFF) position, engage the parking brake, turn the ignition key to the OFF position and remove the key from the switch to avoid accidental starting.

Several attachments are available for your tractor. To mount some of these attachments and in order to perform certain maintenance procedures, the deck must be removed from the tractor.

In order to properly remove either a 46-inch or 50-inch cutting deck from beneath the tractor, proceed as follows:

WARNING: Do NOT remove deck immediately after operating the tractor. Allow the engine and other moving parts ample time to cool down prior to performing the following procedure.

•Place the PTO knob into the disengaged (OFF) position and engage the parking brake.

•Lower the deck by moving the lift lever into the bottom notch on the right fender.

•Grasp the PTO idler pulley bracket and pivot it toward the discharge chute to relieve tension on the belt. Remove the deck belt from the

bottom portion of the engine pulley and from around the PTO idler pulley.

•Looking at the cutting deck from the right side of the tractor, locate the deck support pin on the rear right side of the deck.

•Pull the deck support pin outward to release the deck from the deck lift arm. See Figure 15.

•Rotate the pin slightly toward the rear of the tractor and release the pin into the hole provided.

•Repeat the above steps on the left side of the tractor.

1212 specifications

The Cub Cadet 1212 is a compact lawn tractor that stands out for its powerful performance, ease of use, and innovative features designed for homeowners and gardening enthusiasts. Built for durability and versatility, the 1212 combines traditional craftsmanship with modern technology, making it an ideal choice for maintaining residential landscapes.

At the heart of the Cub Cadet 1212 is its robust Kohler engine, which typically boasts around 12 horsepower. This engine delivers exceptional torque and reliability, allowing users to tackle a variety of tasks, from mowing the lawn to hauling light loads. The machine's hydrostatic transmission provides smooth, variable speed control, enabling operators to maneuver with precision and minimal effort. This feature significantly enhances the user experience, especially when navigating tight corners and uneven terrain.

One of the standout features of the Cub Cadet 1212 is its 38-inch cutting deck. This mid-sized deck is perfect for small to medium-sized yards. The deck is designed for easy height adjustment, allowing users to customize their mowing height for different grass types and seasonal conditions. Furthermore, the deck incorporates a deck wash system, which makes maintenance simple by enabling easy cleaning after mowing sessions.

The Cub Cadet 1212 is equipped with ergonomic controls that enhance comfort during operation. The soft-touch steering wheel and comfortable seating ensure that users can operate the tractor for extended periods without discomfort. Additionally, the easy-to-reach controls allow for a seamless transition between different functionalities, such as switching from mowing to attaching optional accessories like baggers or snow throwers.

In terms of build quality, the 1212 demonstrates robust construction featuring a sturdy steel frame designed to withstand the rigors of regular use. This durability is complemented by a reliable starting system, often featuring electric start options for added convenience.

Another critical aspect is the innovative design that caters to safety, with features like safety switches that prevent the tractor from being operated when the driver is not in a seated position. This commitment to user safety reflects Cub Cadet's dedication to providing a reliable and enjoyable mowing experience.

In summary, the Cub Cadet 1212 is a versatile and dependable lawn tractor equipped with a variety of features that prioritize performance, comfort, and safety. Its combination of a powerful engine, user-friendly controls, and durable construction makes it an excellent choice for homeowners looking to simplify their lawn care routines. Whether for mowing, hauling, or additional landscaping tasks, the Cub Cadet 1212 continues to be a favored model among gardening enthusiasts.