Graco 4000cc, 3000cc important safety instructions Personal Protective Equipment

Page 5

Warnings

WARNING

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This equipment includes but is not limited to:

Protective eyewear, and hearing protection.

Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS from distributor or retailer.

Do not leave the work area while equipment is energized or under pressure. Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.

Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manufacturer’s replacement parts only.

Do not alter or modify equipment.

Use equipment only for its intended purpose. Call your distributor for information.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

Do not kink or over bend hoses or use hoses to pull equipment.

Keep children and animals away from work area.

Comply with all applicable safety regulations.

MOVING PARTS HAZARD

Moving parts can pinch, cut or amputate fingers and other body parts.

Keep clear of moving parts.

Do not operate equipment with protective guards or covers removed.

Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure and disconnect all power sources.

3A0540L

5

Image 5
Contents Ball Lowers Models ContentsCurrent Ball Lowers Cross Reference ChartFire and Explosion Hazard Personal Protective Equipment Cutaway of TSL Reservoir, and Fill Lines Changing the TSLRepair Replace the Throat Packings Without Disconnecting LowerTSL Pump Repair if present Shield Disassembly/ReassemblyTSL Pump Troubleshooting Problem Cause Solution Seat Puller Kit 220384 Lower DisassemblyInlet Seat with Pressure Relief Valve Exploded View of Lower See Throat Packing DetailCutaway View of Lower Age the seal Lower ReassemblyComponent Rupture Hazard Repair Repair Shields shipped loose PartsThroat Packing Detail 3000cc LowersClick here to return to repair kit Description 24F451 24F453 24F452 24J888 Qty 4000cc LowersInlet Check nylon, sst, fluoroelastomer Repair Kits, Related Manuals, and Accessories Technical Data Graco Information Graco Standard Warranty