|
| IMPORTANT: This unitis shipped without gasoline |
|
| or oil in the engine. After assembly, see |
|
| OPERATION sectionof this manual for proper fuel |
|
| and engine oil |
| Left | NOTE: To determine right and left hand sides of your |
|
| |
|
| |
|
| the engine farthest away fromyou. |
|
| Your |
Right |
| assembled at the factory,except for the nozzle, the |
|
| chipper chute with support bracket and the catcher bag. |
| Front | These parts are shipped loose in the carton. A pair of |
| safety glasses and a | |
|
| |
|
| includedin the carton. |
| Chipper Chute |
Catcher Bag | with Support Bracket |
| |
of Engine Oil | Nozzle |
| Figure I |
Spark Plug |
|
Wire |
|
Figure 2
Removing From Carton
Cut the corners of the carton. Remove all packing inserts.
Remove aUloose parts. See Figure 1.
Push down on handle to lift front of chipper- shredder vacuum and roll unit out of the carton.
Make certain all parts and literature have been removed before the carton is discarded.
Loose Parts
(See Figure 1.)
1.Nozzle
2.Chipper Chute with Support Bracket
3.Catcher Bag
4.Safety Glasses (Not Shown in Figure 1 )
5.A
Tools Required
t.1/2" or adjustablewrenches
2.7/16" or adjustablewrenches
3.Funnel(Recommended)
4. | Pliers | ; | ,b |
Disconnecting Spark Plug
(See Figure 2.)
Before proceedingwith assembly of your new
5