Craftsman 247.77763 owner manual Save These Instructions for Future Reference

Page 4

seconds after the engine is shut off. Never place any part of the body in the impeller area untilyou are sure the impeller has stopped rotating.

Keep all guards and safety devices in place and operating propedy.

Do not allow an accumulation of processed matedal to build up in the discharge area as this will prevent proper discharge and can result in kick-beck from the chipper chute.

- Keep your face and body back from chipper chute to avoid accidental bounce back of any material.

If the cutting mechanism strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately stop the engine, disconnect

the spark plug wire and move the wire away from the spark plug. Allow the machine to stop and take the following steps:

a.Inspect for damage

b. Repair or replace any damaged pads.

c.Check for any loose parts and tighten to assure continued safe operation.

Muffler and engine become hot and can cause a burn. Do not touch.

Do not allow leaves or other debris to build up on engine'smuffler. The debris could igniteand cause a

fire.

Do not operate engine if air cleaner or cover over carburetor air-intake is removed, except for

adjustment. Removal of such pads couldcreate a fire hazard.

Children

Tragic accidents can occur if the operator is not alert to the presence of small children. Children are often attracted to the chippingand vacuuming activity. Never assume that children will remain where you last saw them.

Keep children out of the work area and under the watchful eye of a responsible adult other than the

operator.

Be alert and turn the unit off if a child enters the area. Never allow children under the age of 16 to operate the chipper-shreddervacuum.

Service

Use extreme care in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive.

Store fuel and oil in approved containers, away from heat and open flame, and out of the reach of children.

Check and add fuel before starting the engine. Never remove gas cap or add fuel while the engine is running. Allow engine to cool at least two minutes before refueling.

Replace gasoline cap securely and wipe off any spilledgasoline before startingthe engine as it may cause a fire or explosion.

Extinguishall cigarettes, cigars, pipes and other sourcesof ignition.

Never refuel unit indoorsbecause flaEnmablevapors will accumulate in the area.

Never store the machine or fuel container inside

where there is an open flame or spark such as a gas hotwater heater, clothes dryer or furnace.

Never run your machine in an enclosed area as the exhaust from the engine contains carbon monoxide, which is a odorless, tasteless and deadly poisonous gas.

To reducefire hazard, keep engine and muffler free of leaves, grass, and other debris build-up. Clean up fuel and oilspillage. Allow unit to cool at least 5 minutes before storing.

Before cleaning, repairing, or inspecting, make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and keep wire away from spark plug to prevent accidental starting. Do not use flammable solutionsto clean air filter.

Keep ell nuts, bolts, and screws tightto be sure the equipment is in safe workingcondition.

Never tamper with safety devices. Check their proper operation regularly.

After striking a foreign object, immediately stop the engine, disconnectthe spark plug wire from the spark plug, and thoroughlyinspect the unitfor any damage.

Repair damage before starting and operating unit. Do notalter or tamper with the engine's governor setting. The governor controlsthe maximum safe operating speed of the engine. Over-speeding the engine is dangerous and wilt cause damage to the engine and to other moving parts of the machine. Check the vacuum bag frequently for wear. Replace if worn or damaged.

Keep vacuum bag free of debris _'..hen_ in use.

Your

Responsibility

Ab.

Restrict the use of thispower machine to

 

persons who read, understand and follow the

 

warnings and instructionsin this manual and on

 

the machine.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Image 4
Contents Crrftsmrn Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.AProduct Specification General Operation Save These Instructions for Future Reference Disconnecting Spark Plug Removing From CartonLoose Parts Tools RequiredAttaching the Nozzle Attaching the Chipper ChuteUts Attaching the Catcher BagMeets Ansi safety standards Know Your Chipper-Shredder VacuumOperating Controls Stopping the EngineGas And Oil Fill-up Starting The EngineAdjusting Nozzle Height Operation of your Chipper-Shredder Vacuum

247.77763 specifications

The Craftsman 247.77763 is a high-performance lawn tractor designed to meet the needs of homeowners looking for efficiency, durability, and versatility in their lawn care routine. This model stands out for its robust construction and innovative technologies that enhance its functionality and ease of use.

At the heart of the 247.77763 is a powerful twin-cylinder engine that provides reliable power and smooth operation. The engine is designed for optimal torque and can handle various mowing conditions, from thick grass to uneven terrain. This tractor features a 42-inch cutting deck, which allows for efficient mowing of larger areas without sacrificing maneuverability. The cutting height can be easily adjusted to achieve the desired length, offering flexibility depending on the season and grass type.

One of the standout features of the Craftsman 247.77763 is its Hydrostatic transmission. This technology offers seamless speed control, allowing the operator to adjust the speed easily without the need for manual shifting. This is particularly beneficial for navigating around obstacles or changing mowing areas, significantly improving overall ease of operation.

Additionally, the Craftsman 247.77763 is equipped with a tight turning radius, making it easier to navigate around flower beds, trees, and other obstacles in the yard. This enhances the overall precision when mowing and trimming, ensuring a more polished and professional-looking lawn. The tractor's sturdy construction is designed to withstand the rigors of outdoor use, ensuring longevity and reliability over time.

Another feature that sets the Craftsman 247.77763 apart is its compatibility with various attachments. This lawn tractor can be equipped with snow blades, baggers, and other accessories, transforming it into a versatile year-round tool for yard maintenance. The ergonomic design of the seat and controls means that users can operate this machine comfortably for extended periods.

Safety is prioritized in the design of the 247.77763, with features such as a safety ignition switch and durable, easy-to-use controls that help minimize risks during operation. Overall, the Craftsman 247.77763 combines power, efficiency, and versatility, making it an ideal choice for homeowners seeking a reliable lawn care solution.