Billy Goat TKD512SP specifications TAMPER-TKD only Handling & Transporting, Storage, Propulsion

Page 7

16OPERATION continued

16.8 TAMPER-TKD ONLY

16.4 HANDLING & TRANSPORTING:

Before turning machine off, use the Tamper to slowly push remaining pieces of wood through the chipper. This can prevent any remaining wood from jamming in the chipper when machine is turned off.

Do not leave tamper on the ground, store tamper in the chipper hopper.

Tamper Storage Position

Using two people to lift machine is recommended. Lift holding the handle and front of nozzle. Secure in place during transport.

16.11STORAGE

Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Be sure engine is cool. Do not smoke. Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Run engine until fuel tank is empty and engine runs out of gasoline.

NOTE: Fuel stabilizer (such as Sta-Bil) is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow mix ratio found on stabilizer container. Run engine at least 10 min. after adding stabilizer to allow it to reach the carburetor.

Do not store with debris in bag.

16.9

PROPULSION

 

Bail Up

 

 

Disengages

 

 

 

 

Handle

This vacuum is self-propelled. To engage the drive, pull

Bail

Drive

 

 

operator's bail against operator's handle. The drive is disen-

 

 

 

gaged by releasing the operator's bail.(See figure at right)

 

 

 

GROUND SPEED can be varied by applying slight downward

 

 

 

pressure to handle during operation (to allow drive wheels

 

 

 

partial slippage) or by changing the engine rpm.

 

 

 

For improved control in confined areas, this machine can be

 

 

Bail

freewheel pushed forward or backward by releasing the

 

 

 

 

Down

operator's bail and pushing machine.

 

 

Engages

Drive

Part No. 890604

Page 7 of 12

Form No. F021602C

Image 7
Contents Nozzle Wear Plates Shredder KITOn Board Vacuum Hose KIT Hose Extension KIT8VIBRATION 7SOUNDPUT OIL in Engine Before Starting Controls Literature Assy P/NIf Your Unit Fails to Start Use caution when using chipperClearing a Clogged Nozzle Maximum DiameterDebris bags are normal replaceable wear items MulchCompost EngineStorage TAMPER-TKD only Handling & TransportingPropulsion Engine See engine manufacturer Disconnect Spark Plug Wire Before Servicing UnitImpeller Removal and Chipper Adjustment Debris BAG SeeImpeller Removal Chain ReplacementChain Adjustments Clutch AdjustmentParts Drawing KD512SP TKD512SP Parts ListParts List TroubleshootingEngine Service and Warranty

TKD512SP, KD512SP specifications

The Billy Goat KD512SP and TKD512SP are two powerful outdoor vacuum solutions designed for effortless lawn care and debris management. These innovative machines stand out in the market due to their robust construction, advanced features, and ease of use.

Both models are equipped with a reliable 340 cc engine specifically built for optimal performance. This engine provides ample power to handle tough debris while ensuring efficient fuel usage. The KD512SP features self-propelling technology, enabling users to cover large areas without the physical strain associated with manual operation. The self-propulsion system allows for easy maneuverability over various terrains, making it ideal for both residential and commercial applications.

One of the central features of these vacuum models is the high-performance suction capability. The KD512SP and TKD512SP are designed to effectively collect leaves, grass clippings, and other debris, making them perfect for fall clean-ups or maintaining a tidy lawn year-round. The exceptional suction power is aided by a large, 31-inch wide intake, which significantly reduces the time spent cleaning outdoor spaces.

In terms of build quality, both models boast heavy-duty construction that ensures durability and long-lasting performance. They are constructed with high-quality materials that can withstand harsh outdoor conditions, providing peace of mind for users. The vacuum bags are designed for easy emptying and can hold a significant amount of debris, ensuring that users can work longer without frequent interruptions.

The KD512SP comes fitted with a 5-position adjustable height feature, allowing users to customize the vacuuming process based on the type of debris and the surface being treated. This adaptability is essential for achieving optimal results on a variety of landscapes.

Technology is also a strong point for these Billy Goat vacuums. They utilize a unique blade design that ensures efficient shredding of leaves and clippings. This technology not only enhances the collection process but also reduces the volume of debris for easier disposal.

Both the KD512SP and TKD512SP are equipped with easy-to-navigate controls, which enhance user experience. The user-friendly design ensures that even individuals with minimal experience in outdoor machinery can operate these vacuums effectively.

In summary, the Billy Goat KD512SP and TKD512SP are exceptional choices for anyone looking for a powerful, user-friendly outdoor vacuum. With their robust engines, advanced suction technology, and durable construction, they provide outstanding performance for all your lawn care needs.