Billy Goat TKV650SPH owner manual Troubleshooting, Warranty Claim Procedure

Page 15
The decision by the Technical Service Department at BILLY GOAT to approve or reject a Warranty Claim is final and binding.
The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination. BILLY GOAT will notify their conclusions to the distributor service manager from whom the claim was received.

KVSP/TKVSP Owner’s Manual

Troubleshooting

Problem

Possible Cause

Solution

Abnormal vibration.

· Loose or out of balance impeller or

· Check impeller and replace if required.

 

loose engine

Check engine

Will not vacuum or has poor

· dirty debris bag. Hose kit cap missing.

· Clean debris bag. Shake bag clean or

vacuum performance

·Clogged nozzle or exhaust. Excessive

wash. Check for hose kit cap. Unclog

 

quantity of debris.

nozzle or exhaust. Allow air to feed with

 

· Improper nozzle height

debris

 

 

· Adjust nozzle height so that it is closer

 

 

to the debris

Engine will not start.

· Throttle in off position. Engine not in full

· Check stop switches, throttle, choke

 

choke position. Out of gasoline. Bad or

position and gasoline. Connect spark

 

old gasoline. Sparkplug wire

plug wire. Clean or replace air filter. Or

 

disconnected. Dirty air cleaner

contact a qualified service person.

 

 

 

Engine is locked, will not pull

· Debris locked in impeller. Engine

· See page 5. Contact a engine service

over.

problem.

dealer for engine problems

Nozzle scrapes ground in

 

Adjust nozzle height (See Nozzle height

Nozzle height out of adjustment

fine adjustment for hard surfaces on

lowest height setting.

 

page 5

 

 

No self-propelling

· Drive bail not engaged

· Engage the drive bail.

 

· Drive belt worn or broken

· Check the drive belt.

 

· Drive clutch cable out of adjustment or

· Check the drive clutch cable (see page

 

broken.

12).

 

· Drive chain off the sprocket.

· Check the drive chain (see page 12).

Self propelled drive will not

· Improper drive clutch cable adjustment

· Check the drive clutch cable (see page

release

or cable is kinked.

13).

Noisy or broken chain

· No chain lubrication.

· Lubricate chain.

 

· Chain misalignment or tension.

· Check the drive chain (see page 12).

Unit does not free-wheel

· None

· Push the unit slightly forward then the

backwards

 

unit will free-wheel

Too much dust coming from

· Vacuuming very dry, brittle or small

· Switch to felt bag (see page 1

bag.

debris

accessories)

When servicing engine refer to specific manufacturers engine owner's manual. Engine warranty is covered by the specific engine manufacturer. If your engine requires warranty or other repair work contact your local servicing engine dealer. When contacting a dealer for service it is a good idea to have your engine model number available

for reference (See table page 3). If you cannot locate a servicing dealer in your area you can contact the manufacturers national service organization.

To reach:

American Honda: 800-426-7701

Briggs & Stratton: 800-233-3723

WARRANTY CLAIM PROCEDURE

Should a BILLY GOAT ® machine fail due to a defect in material and/or workmanship, the owner should make a warranty claim as follows:

•The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing BILLY GOAT Dealer.

•The owner must present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt.

•The Warranty Claim will be completed by the authorized BILLY GOAT Dealer and submitted to their respective BILLY GOAT Distributor for their territory Attention: Service Manager. Any parts replaced under warranty must be tagged and retained for 90 days. The model number and serial number of the unit must be stated in the Warranty Claim.

•The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration.

•

For online product registration go to www.billygoat.com

Part No 891058

15

Form No F072508B

Page 14 Page 16
Image 15
Page 14 Page 16
Contents KV600SP, KV650SPH, TKV650SPH Billy Goat KV VacuumAbout this Manual ContentsSerial Plate Data SpecificationsGeneral Safety Instructions and Symbols Form No F072508B Sound Vibration DataIntended USE Honda Briggs & Stratton Instruction LabelsEngine Labels Packing Checklist AssemblyParts BAG Literature Assy Handling & Transporting OperationStarting If Your Unit Fails to StartDebris BAG Vacuuming OperationMulch CompostMaintenance Drive Chain Replacement and AlignmentImpeller Removal Do not Adjust While the Machine is Running Belt Tension AdjustmentBelt Replacement Chipper blades are normal replaceable wear items Chipper Blade Removal and Sharpening TKV onlyWarranty Claim Procedure TroubleshootingParts Drawing KVSP/TKVSP Washer Lock 3/8 ST MED Parts List KVSP/TKVSPMaintenance Record Form No F072508B Form No F072508B

TKV650SPH, KV650SPH specifications

The Billy Goat TKV650SPH and KV650SPH are exceptional outdoor power tools designed to meet the needs of both professionals and homeowners. Known for their impressive capabilities, these rugged blowers are designed to tackle heavy debris management with ease.

One of the standout features of the TKV650SPH and KV650SPH is their powerful 650cc engine. This engine delivers superb performance, ensuring consistent airflow and suction, which is ideal for clearing leaves, grass clippings, and other debris. The high-performance engine not only enhances operational efficiency but also allows users to complete their tasks in a fraction of the time compared to underpowered alternatives.

Both models are designed with a robust chassis that provides excellent stability and durability. This is especially important for those who work in challenging conditions. The TKV650SPH, in particular, is equipped with a self-propelling feature that allows for easier maneuverability across various terrains, reducing user fatigue during extended use.

An important technology incorporated into these models is the variable speed control. This feature allows users to easily adjust the blower's airspeed to suit the task at hand. Whether you need to delicately clear debris from flower beds or generate more power for larger areas, the adjustable speed settings provide ultimate versatility.

Moreover, the TKV650SPH and KV650SPH models are equipped with a 3-in-1 function that includes vacuuming, blowing, and shredding capabilities. This multi-functionality enables users to efficiently switch between tasks, minimizing the need for additional equipment.

The shredding capability is particularly noteworthy, as it reduces the volume of collected debris, making disposal easier and more efficient. Additionally, the design of the collection bag is optimized for maximum capacity, ensuring fewer interruptions during operation.

Comfort is also a priority in the design of these blowers. They feature ergonomic handles that improve grip and reduce strain during use. The lightweight construction further enhances ease of handling, making these blowers an excellent choice for prolonged use.

In summary, the Billy Goat TKV650SPH and KV650SPH represent the pinnacle of outdoor blowers, combining power, versatility, and user-friendly features. Whether used for professional landscaping or residential yard maintenance, these models stand out for their ability to handle diverse tasks efficiently and effectively. As such, they are an investment worth considering for anyone in need of robust yard management tools.
Top Page Image Contents