Billy Goat TKV650SPH owner manual Chipper Blade Removal and Sharpening TKV only

Page 14

KVSP/TKVSP Owner’s Manual

CHIPPER BLADE REMOVAL AND SHARPENING (TKV ONLY)

Chipper blades are normal replaceable wear items.

DANGER Chipper blade is sharp. Replace any damaged blade.

Depending on the type and amount of wood being chipped, the chipper blade will eventually get dull, losing it’s cutting ability. Evidence of a dull blade is a noticeably reduced chipping ability or a rough cut on end of branch. Note: The chipper blade gap is factory set and should be checked each time impeller is removed from engine crankshaft and reset if required. If reassembly requires a different quantity of shim washers, Billy Goat® shim washer must be used.

1.Follow the steps 1-6 on the impeller removal instructions.

2.Using a 3/16" Allen wrench and 1/2" open end wrench, remove chipper blade from impeller.

3. Sharpen blade by lightly grinding the cutting edge of the blade at 40 degrees (see figure below). It is not necessary to remove all nicks from the cutting edge. CAUTION: Be careful to avoid heat buildup in the blade during sharpening. This will reduce it’s heat- treated hardness properties and will reduce blade life. Evidence of too much heat build-up is a change of color along sharpened edge.

4. The same chipper blade can be sharpened several times. However, blade replacement is required when blade no longer overhangs the chip relief hole in impeller back plate or if increased vibration occurs (see fig below).

5.Chipper blade installation is in reverse order of removal.

Correct

Blade

400

Incorrect

Edge of chip

relief hole

Part No 891058

14

Form No F072508B

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Billy Goat KV Vacuum KV600SP, KV650SPH, TKV650SPHContents About this ManualSpecifications Serial Plate DataGeneral Safety Instructions and Symbols Form No F072508B Intended USE SoundVibration Data Engine Labels Honda Briggs & StrattonInstruction Labels Parts BAG Literature Assy Packing ChecklistAssembly If Your Unit Fails to Start OperationStarting Handling & TransportingVacuuming Operation Debris BAGCompost MulchImpeller Removal MaintenanceDrive Chain Replacement and Alignment Belt Replacement Do not Adjust While the Machine is RunningBelt Tension Adjustment Chipper Blade Removal and Sharpening TKV only Chipper blades are normal replaceable wear itemsTroubleshooting Warranty Claim ProcedureParts Drawing KVSP/TKVSP Parts List KVSP/TKVSP Washer Lock 3/8 ST MEDMaintenance Record Form No F072508B Form No F072508B

TKV650SPH, KV650SPH specifications

The Billy Goat TKV650SPH and KV650SPH are exceptional outdoor power tools designed to meet the needs of both professionals and homeowners. Known for their impressive capabilities, these rugged blowers are designed to tackle heavy debris management with ease.

One of the standout features of the TKV650SPH and KV650SPH is their powerful 650cc engine. This engine delivers superb performance, ensuring consistent airflow and suction, which is ideal for clearing leaves, grass clippings, and other debris. The high-performance engine not only enhances operational efficiency but also allows users to complete their tasks in a fraction of the time compared to underpowered alternatives.

Both models are designed with a robust chassis that provides excellent stability and durability. This is especially important for those who work in challenging conditions. The TKV650SPH, in particular, is equipped with a self-propelling feature that allows for easier maneuverability across various terrains, reducing user fatigue during extended use.

An important technology incorporated into these models is the variable speed control. This feature allows users to easily adjust the blower's airspeed to suit the task at hand. Whether you need to delicately clear debris from flower beds or generate more power for larger areas, the adjustable speed settings provide ultimate versatility.

Moreover, the TKV650SPH and KV650SPH models are equipped with a 3-in-1 function that includes vacuuming, blowing, and shredding capabilities. This multi-functionality enables users to efficiently switch between tasks, minimizing the need for additional equipment.

The shredding capability is particularly noteworthy, as it reduces the volume of collected debris, making disposal easier and more efficient. Additionally, the design of the collection bag is optimized for maximum capacity, ensuring fewer interruptions during operation.

Comfort is also a priority in the design of these blowers. They feature ergonomic handles that improve grip and reduce strain during use. The lightweight construction further enhances ease of handling, making these blowers an excellent choice for prolonged use.

In summary, the Billy Goat TKV650SPH and KV650SPH represent the pinnacle of outdoor blowers, combining power, versatility, and user-friendly features. Whether used for professional landscaping or residential yard maintenance, these models stand out for their ability to handle diverse tasks efficiently and effectively. As such, they are an investment worth considering for anyone in need of robust yard management tools.
Top Page Image Contents