Grizzly Assembly, H8189/H8190 Accessory Inventory Figure, To assemble the H8189/H8190

Page 12

B

A

C

 

F

E

 

 

 

 

 

D

 

 

Figure 3. Model H8189/H8190 accessory

 

 

inventory.

 

 

 

H8189/H8190 Accessory Inventory (Figure 3)

 

Qty

 

 

 

A.

Chemical Hose

 

1

B.

Chemical Filter

 

1

C.

O-Ring Seal Kit

 

1

D.

Spark Plug Wrench

 

1

E.

Spark Plug Wrench Handle

1

F.

Input Source Filter

 

1

G.

Hose Adapter Male to Male (not shown)...

1

-10-

Assembly

Refer to Figure 1 on Page 4 for identification of components in the following steps.

To assemble the H8189/H8190:

1.Insert the handle into the frame posts and push down until the securing pins latch in the securing pin holes.

Note: You may need to push the securing pins in to allow the handle to slide into the frame posts.

2. Thread the spray gun wand into the spray gun and tighten securely.

3.Connect the male end of the high pressure hose to the pump output quick coupler.

4.Connect the high pressure hose quick coupler to the spray gun.

5.Thread the female end of the input hose onto the pump input port.

6.Connect the other end of the input hose to a spigot providing at least 5 GPM, or to the in- feed source filter, if drawing from a standing water source.

Note: Depending on the spigot fitting type, you may need to use the provided male-to- male hose adapter to connect the pressure washer to this type of water source.

H8189/H8190 Gasoline Pressure Washer

Image 12
Contents Model H8189/H8190 H8190 H8189Page Table of Contents Introduction ForewordContact Info H8189/H8190 Gasoline Pressure Washer H8189/H8190 Gasoline Pressure Washer General Identification Safety Instructions for Machinery H8189/H8190 Gasoline Pressure Washer Additional Safety Instructions for Pressure Washers Setup UnpackingInventory H8189/H8190 Inventory Figure QtyAssembly H8189/H8190 Accessory Inventory FigureTo assemble the H8189/H8190 Operations Connections and ControlsH8189/H8190 Pump Controls Figure H8189/H8190 Engine Controls FigureAdjusting Pressure Break-InChanging Nozzles To change nozzles on the H8189/H8190Applying Chemicals NozzlesStanding Water Source To draw water from a standing sourceSpray Gun Lock Starting To start the H8189/H8190 pressure washerShutdown Procedure To shut down the pressure washerAccessories Maintenance ScheduleGeneral Maintenance Engine Oil ChangeTo change the engine oil Pump Oil Change Air Filter Service Spark Plug Adjustment ReplacementTo clean the outer air filter element Troubleshooting Symptom Possible Cause SolutionH8189 Pump Parts Breakdown H8189 Pump Parts List REF DescriptionH8189Engine Parts Breakdown H8189 Engine Parts List DescriptionH8189 Frame and Accessories Parts Breakdown H8189 Frame and Accessories Parts List H8189 Machine Labels Breakdown DescriptionH8190 Pump Parts Breakdown H8190 Pump Parts List Parts H8190 Engine Parts List Governor ARM Bolt H8190 Frame and Accessories Parts Breakdown H8190 Frame and Accessories Parts List 401 PH8189301 Page Page Page Warranty and Returns