Operation, Surface Preparation, Start Up | Husqvarna 5525PW, 6026PW

! CAUTION

OPERATION

1. Surface Preparation

ALWAYS engage the trigger safety latch when unit is not in use. The following cleaning procedure will help you organize your cleaning task and ensures that you will achieve the best results in the shortest amount of time. Remember to use the spraying / cleaning techniques mentioned in the following section.

Before starting a pressure washer cleaning job, prepare the surface you intend to clean. Clear furniture from the area and make sure that all windows and doors are closed tightly. Also, protect all plants and trees near the cleaning area with a drop cloth. A covering ensures that your plants won’t be sprayed by the detergents.

2. Start Up

ALWAYS use this start up procedure to ensure that the unit is started safely and properly.

If water has frozen in the

NOTICE pressure washer, thaw the pressure washer in a warm room before starting. DO NOT pour hot water on or into the pump; internal parts will be damaged.

1. Check engine oil levels. Add oil as necessary.

NOTE: Some units are equipped with a low oil sensor that shuts the engine off if the oil level falls below a certain level. If the unit stops unexpectedly, check both the oil and fuel levels. Check the oil level each time you refuel the unit.

2.Check fuel level. Add unleaded gasoline (rated 86 octane or higher) as required.

DO NOT refuel a

! WARNING hot engine. Refueling a hot engine could cause a fire. Use only fresh, clean unleaded gasoline. Close the fuel shutoff valve during refueling.

3.Attach a garden hose to the inlet connection for garden hose and connect it to the water supply. Use a hose with a minimum inside diameter of 5/8” (.016 m) and a length of 50 ft. (15 m) or less.

Some local plumbing codes

NOTICE require backflow prevention when connecting to a fresh water supply. Install a backflow preventer upstream from the pump if necessary.

a. If inlet water pressure is over 100 psi, install a regulating water valve at the garden hose connection.

b. DO NOT exceed 100˚ F (38˚ C) inlet water temperature.

NOTE: The inlet water supply must have a minimum flow rate of 8 gpm (30 lpm) or 5 gpm (191 lpm) on 5525PW.

4. Turn the water supply ON.

NOTICE	NEVER run the unit dry. Be sure
	the water supply is completely

turned on before operating the unit.

5.Squeeze the gun until water sprays from the tip indicating that all air is purged from the system. Set the trigger safety latch.

6.On model 5525PW: Honda GC Engine:

Open the fuel shutoff valve by turning the knob counterclockwise until it stops. Close the choke (if engine is cold) by pulling the choke lever out. The throttle is fixed.

On models 6026PW and 9030PW - Robin/Subaru Engines:

Open the fuel shutoff valve by turning the lever to the downward position. Close the choke (if the engine is cold) by moving the choke lever fully to the left. Move the throttle fully to the left to the "RUN" or "RABBIT" position. Turn the On/Off switch to the "ON" position

On model 1335PW - Honda GX engine:

Open the fuel shutoff valve by pushing the lever to the right. Close the choke (if the engine is cold) by moving the choke lever fully to the left. Move the throttle fully to the "RUN" or "RABBIT" position. Turn the On/Off switch to the "ON" position.

7.Start the engine:

If the engine is cold, completely close the engine choke.

If the engine is warm, leave the choke open or just partially closed. Unlock the trigger safety latch on the gun. Grasp the starter rope and brace one foot on the chassis. While squeezing the trigger on the gun, pull the starter rope rapidly and firmly. Continue holding the rope as it returns. Repeat these steps until the engine starts. In cool weather, the choke may have to be kept closed for 10 to 30 seconds to keep the engine running. Otherwise, open the choke as soon as the engine starts.

When pulling the starter rope, make sure to keep your hand

and arm clear of the engine and cart components.

NEVER let the starter rope NOTICE return by itself. Doing so could

jam the recoil system.

English — 11

9030PW, 1335PW, 6026PW, 5525PW specifications

Husqvarna, a renowned name in outdoor power equipment, offers an array of high-performance chainsaws, including the 6026PW, 9030PW, 1335PW, and 5525PW models. Each model is designed to cater to various cutting needs, making them suitable for both professional and amateur users.

The Husqvarna 6026PW boasts a robust engine, specifically designed for heavy-duty use. With its powerful air-cooled two-stroke engine, this model delivers exceptional cutting performance while maintaining low levels of vibration, which reduces user fatigue during extended use. The integrated air filter system prolongs the lifespan of the engine, ensuring it operates efficiently under demanding conditions.

The 9030PW model stands out for its advanced technology and ease of use. It features an automatic oiler system that ensures consistent lubrication of the chain, enhancing both performance and longevity. The 9030PW also benefits from an ergonomic design, which includes an adjustable handle for optimal comfort and control. This model's lightweight construction makes it easy to maneuver, perfect for detailed trimming or larger cutting tasks.

The Husqvarna 1335PW is designed with the homeowner in mind, offering a perfect balance of power and finesse. One of its defining features is the X-Torq engine, which provides higher torque over a wider RPM range while also reducing fuel consumption and emissions. The 1335PW also includes a quick-release air filter for easy cleaning and maintenance, ensuring your chainsaw remains in peak condition.

Finally, the Husqvarna 5525PW combines strength and versatility, making it suitable for a diverse range of cutting applications. This model features a durable chain brake for added safety, helping to prevent accidents during operation. The 5525PW's easy-to-start system minimizes starting effort, allowing users to get to work quickly without hassle.

All four models benefit from Husqvarna's commitment to user safety and comfort, making them ideal for both professionals and DIY enthusiasts. With innovative features and robust design, the Husqvarna 6026PW, 9030PW, 1335PW, and 5525PW represent the perfect blend of performance, durability, and technology, carving out a niche for themselves in the competitive chainsaw market.