Husqvarna 1335PW, 5525PW, 6026PW, 9030PW manual Frequently Asked Questions, Engine Pump

Page 6

FREQUENTLY ASKED QUESTIONS

How do I start my pressure washer?

1.Make sure you have gas and oil in the engine.

2.Turn the water on, then squeeze the trigger on the gun to make sure the water will flow smoothly out of the nozzle or tip.

3.Put the engine throttle control in the “Fast/Start” position. Set the fuel valve to “ON” Set the On/Off switch to “ON” (if applicable).

4.Close the choke.

5.Squeeze and hold the trigger (to relieve any back pressure in the pump) while pulling the starter cord.

6.If the engine does not start after three tries, see Troubleshooting Section (Pages 20-21).

What type of oil do I use?

ENGINE

THE ENGINE DOES NOT COME FILLED WITH OIL. For engine oil types and quantities refer to Pages 16 and 19 of this manual and also refer to the included engine owner’s manual for oil changing instructions.

PUMP

See Page 17 for pump oil types and quantities. Please note the 5525PW model has a pump that is sealed and does not require service.

Why don’t I have any water pressure?

•Is the water hose attached to the pressure washer?

•Is the water turned on?

•Check for any kinks, leaks, or blockage in the hoses, fittings, or the nozzle.

•Is the inlet filter screen free of debris? Check and remove debris if needed.

•Is the quick connect tip in place? (See Page 9.)

How do I get high pressure?

•Use any color tip except black. The black tip is only used for low pressure detergent application.

How do I get the soap suction to work?

For Detergent Tanks:

1.Attach clear plastic tube to plastic barb on detergent tank (see Figure 2).

2.Fill detergent tank with detergent formulated for use with pressure washers.

3.Install the black spray tip to apply low pressure detergent.

For Other Units:

1.Attach clear plastic tube to brass barb on pump (see Figure 3).

2.Put the other filter end of the clear tube into the detergent container.

3.Install the black spray tip to apply low pressure detergent.

Why doesn’t the pressure washer apply detergents with high pressure?

The reason you don’t apply detergents with high pressure is that the detergents “bounce” off the cleaning surface as fast as you apply them.

Detergent is only effective when you allow it time to work on the surface of whatever you are cleaning. You can only apply detergent at low pressure, wait 1-3 minutes to allow it to work, and rinse the surface with high pressure.

What maintenance do I need to perform on my pressure washer?

1.After turning off the pressure washer and the water, depressurize the hose by triggering the gun.

2.Remove the garden hose and high pressure hose from the pump.

3.Pull the start rope slowly five times to purge water from the pump. This will help protect the pump from damage.

4.DO NOT store your pressure washer in an area where the temperature will drop below 32˚F / 0˚C) unless pressure washer is properly winterized (see Page 15).

Where can I buy accessories for my pressure washer?

• Call your local Husqvarna Dealer.

English — 5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s manual 5525PW, 6026PW, 9030PW, 1335PW Contents KEY to Symbols Safety GuidelinesIntroduction Dear CustomerWhat is WHAT? 5525PW 6026PW 9030PW/1335PWFrequently Asked Questions Engine PumpSafety Guidelines Important Safety InstructionsSafety Guidelines Unpacking AssemblyPRE-OPERATION Husqvarna dealerConnect the high pressure hose to the pump outlet See Figure Trigger Safety Latch For models 9030PW and 1335PW Insert spray tipsOperation Surface PreparationStart Up Pressure Adjustment Adjusting the Spray FAN AngleInitial High Pressure Rinse HOW to Avoid Damaging Surfaces Angle to the Cleaning SurfaceDistance from Cleaning Surface Detergent ApplicationFinal Rinse Cleaning PowerGeneral Cleaning Tips ShutdownStorage Long Term Storage Instructions More than 30 Days in StorageTips for Extending the Life of Your Pressure Washer Engine Oil Type SAE 10W-30 MaintenanceEngine OIL Changing Instructions Engine Oil CapacityChecking Pump OIL and Pump OIL Changing Pump Oil TypeMaintenance Schedule Maintenance Schedule Action neededTechnical and Consumer Information Troubleshooting Chart Symptom Possible Causes Corrective ActionsTroubleshooting Chart English 5525PW 6026PW 9030PW and 1335PW 531 30 75-29Pump Assembly Complete Pump for 5525PW531 30 75-12Pump Assembly Complete Pump for 6026PW531 30 75-17Pump Assembly Complete Pump for 9030PW and 1335PWFor customer assistance contact us at our website
Related manuals
Manual 44 pages 36.04 Kb

9030PW, 1335PW, 6026PW, 5525PW specifications

Husqvarna, a renowned name in outdoor power equipment, offers an array of high-performance chainsaws, including the 6026PW, 9030PW, 1335PW, and 5525PW models. Each model is designed to cater to various cutting needs, making them suitable for both professional and amateur users.

The Husqvarna 6026PW boasts a robust engine, specifically designed for heavy-duty use. With its powerful air-cooled two-stroke engine, this model delivers exceptional cutting performance while maintaining low levels of vibration, which reduces user fatigue during extended use. The integrated air filter system prolongs the lifespan of the engine, ensuring it operates efficiently under demanding conditions.

The 9030PW model stands out for its advanced technology and ease of use. It features an automatic oiler system that ensures consistent lubrication of the chain, enhancing both performance and longevity. The 9030PW also benefits from an ergonomic design, which includes an adjustable handle for optimal comfort and control. This model's lightweight construction makes it easy to maneuver, perfect for detailed trimming or larger cutting tasks.

The Husqvarna 1335PW is designed with the homeowner in mind, offering a perfect balance of power and finesse. One of its defining features is the X-Torq engine, which provides higher torque over a wider RPM range while also reducing fuel consumption and emissions. The 1335PW also includes a quick-release air filter for easy cleaning and maintenance, ensuring your chainsaw remains in peak condition.

Finally, the Husqvarna 5525PW combines strength and versatility, making it suitable for a diverse range of cutting applications. This model features a durable chain brake for added safety, helping to prevent accidents during operation. The 5525PW's easy-to-start system minimizes starting effort, allowing users to get to work quickly without hassle.

All four models benefit from Husqvarna's commitment to user safety and comfort, making them ideal for both professionals and DIY enthusiasts. With innovative features and robust design, the Husqvarna 6026PW, 9030PW, 1335PW, and 5525PW represent the perfect blend of performance, durability, and technology, carving out a niche for themselves in the competitive chainsaw market.
Top Page Image Contents