Husqvarna 1335PW, 5525PW, 6026PW Detergent Application, Angle to the Cleaning Surface, Detergents

Page 14

OPERATION

ANGLE TO THE CLEANING SURFACE

When spraying water against a surface, you can generate maximum impact by striking the surface head on. However, this type of impact can cause dirt particles to embed in the surface and can prevent the desired cleaning action.

Spray water against a surface at a 45 degree angle to achieve the most beneficial impact force and to efficiently remove debris.

Figure 15 - Optimum angle to cleaning surface

DISTANCE FROM CLEANING SURFACE

The distance between the spray nozzle and the cleaning surface is another factor that affects the impact force of the water. The impact force of the water increases as the nozzle is moved closer to the surface.

HOW TO AVOID DAMAGING SURFACES

Damage to cleaning surfaces occurs because the impact force of the water exceeds the durability of the surface. You can vary the impact force by controlling the spray tip angle to the cleaning surface and the distance from the cleaning surface and by changing the spray tip. NEVER use a narrow high impact stream on a surface that is susceptible to damage. Avoid spraying windows with a narrow high impact stream. Doing so may break the window. The most sure way to avoid damaging surfaces is to follow these steps:

1.Before triggering the gun, make sure the quick connect tip you are using is appropriate for the application.

The color of the tip shows what spray angle it is:

Red – 0° – Maximum Duty

Yellow – 15° – Heavy Duty

Green – 25° – General Duty White – 40° – Light Duty

Black – 65° – Low Pressure Detergent

2.Place the spray tip approximately 4-5 feet (1,22- 1,52 m) away from the cleaning surface. Then hold the lance and spray tip at a 45 degree angle to the cleaning surface. Trigger the gun.

3.Vary the fan pattern spray angle and the distance to the cleaning surface until optimum cleaning efficiency is achieved without damaging the surface.

4.Detergent Application

NOTE: Use only detergents formulated for pressure washers.

NOTE: Test detergent in an inconspicuous area before use.

NEVER replace quick connect tip

! WARNING when gun is triggered.

DETERGENTS

The use of detergents can dramatically reduce cleaning time and assist in the removal of difficult stains. Many detergents are customized for pressure washer use on specific cleaning tasks. Pressure washer detergents are as thick as water. Using thicker detergents – like dish soap – will clog the chemical injection system and prevent the application of the detergent.

Once applied to a cleaning surface, detergents take time to break down dirt and grime. Detergents work best when applied at low pressure.

You can effectively clean surfaces by combining the chemical action of detergents with high pressure rinses. On vertical surfaces, apply the detergent starting at the bottom and work your way upward. This method prevents the detergent from sliding down and causing streaks. Begin high pressure rinsing at the bottom and work your way upward.

Figure 16 - Quick Connect Tip

English — 13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s manual 5525PW, 6026PW, 9030PW, 1335PW Contents KEY to Symbols Safety GuidelinesIntroduction Dear CustomerWhat is WHAT? 5525PW 6026PW 9030PW/1335PWFrequently Asked Questions Engine PumpSafety Guidelines Important Safety InstructionsSafety Guidelines Unpacking AssemblyPRE-OPERATION Husqvarna dealerConnect the high pressure hose to the pump outlet See Figure Trigger Safety Latch For models 9030PW and 1335PW Insert spray tipsStart Up OperationSurface Preparation Initial High Pressure Rinse Pressure AdjustmentAdjusting the Spray FAN Angle HOW to Avoid Damaging Surfaces Angle to the Cleaning SurfaceDistance from Cleaning Surface Detergent ApplicationFinal Rinse Cleaning PowerGeneral Cleaning Tips ShutdownTips for Extending the Life of Your Pressure Washer StorageLong Term Storage Instructions More than 30 Days in Storage Engine Oil Type SAE 10W-30 MaintenanceEngine OIL Changing Instructions Engine Oil CapacityChecking Pump OIL and Pump OIL Changing Pump Oil TypeMaintenance Schedule Maintenance Schedule Action neededTechnical and Consumer Information Troubleshooting Chart Symptom Possible Causes Corrective ActionsTroubleshooting Chart English 5525PW 6026PW 9030PW and 1335PW 531 30 75-29Pump Assembly Complete Pump for 5525PW531 30 75-12Pump Assembly Complete Pump for 6026PW531 30 75-17Pump Assembly Complete Pump for 9030PW and 1335PWFor customer assistance contact us at our website
Related manuals
Manual 44 pages 36.04 Kb

9030PW, 1335PW, 6026PW, 5525PW specifications

Husqvarna, a renowned name in outdoor power equipment, offers an array of high-performance chainsaws, including the 6026PW, 9030PW, 1335PW, and 5525PW models. Each model is designed to cater to various cutting needs, making them suitable for both professional and amateur users.

The Husqvarna 6026PW boasts a robust engine, specifically designed for heavy-duty use. With its powerful air-cooled two-stroke engine, this model delivers exceptional cutting performance while maintaining low levels of vibration, which reduces user fatigue during extended use. The integrated air filter system prolongs the lifespan of the engine, ensuring it operates efficiently under demanding conditions.

The 9030PW model stands out for its advanced technology and ease of use. It features an automatic oiler system that ensures consistent lubrication of the chain, enhancing both performance and longevity. The 9030PW also benefits from an ergonomic design, which includes an adjustable handle for optimal comfort and control. This model's lightweight construction makes it easy to maneuver, perfect for detailed trimming or larger cutting tasks.

The Husqvarna 1335PW is designed with the homeowner in mind, offering a perfect balance of power and finesse. One of its defining features is the X-Torq engine, which provides higher torque over a wider RPM range while also reducing fuel consumption and emissions. The 1335PW also includes a quick-release air filter for easy cleaning and maintenance, ensuring your chainsaw remains in peak condition.

Finally, the Husqvarna 5525PW combines strength and versatility, making it suitable for a diverse range of cutting applications. This model features a durable chain brake for added safety, helping to prevent accidents during operation. The 5525PW's easy-to-start system minimizes starting effort, allowing users to get to work quickly without hassle.

All four models benefit from Husqvarna's commitment to user safety and comfort, making them ideal for both professionals and DIY enthusiasts. With innovative features and robust design, the Husqvarna 6026PW, 9030PW, 1335PW, and 5525PW represent the perfect blend of performance, durability, and technology, carving out a niche for themselves in the competitive chainsaw market.
Top Page Image Contents