Harbor Freight Tools 2433 manual Operation, IMPORTANT! Prior to, Turning on the Pressure

Page 15

OPERATION

1.Make sure the Power Switch is in the “OFF” position. (See Figure M.)

2.Attach the heavy duty hose to the Pressure Washer, using the Quick Connector Set (36C). (See Figure G.)

3.Attach the Spray Wand (9C), Turbo Wand (33C), or Brush Wand and Adapter (34C, 35C) into the Spray Wand Extension (8C), and press and twist the Wand into the Extension until the Wand locks in place. (See Figures E and F.)

NOTE: The Pressure Washer will not pressurize if the Nozzle is not completely assembled. It will not work properly with only part of the Wand installed.

4.Connect the High Pressure Hose (24C) to the Pressure Washer. (See Figure G.) Make sure all connections are tight. Then, open the water supply valve fully. If leaks occur, shut off water and retighten connections.

5.

IMPORTANT! Prior to

 

POWER SWITCH

 

turning on the Pressure

 

 

 

(Illuminates while

 

Washer, connect the unit

 

on.)

 

to the water supply. Turn

 

 

 

on the water, disengage

 

 

 

the safety, and squeeze the

 

 

 

Trigger (21C) until water

 

 

 

flows out of the Wash Gun

 

 

 

(5A). This removes air from

 

 

 

the system and allows the

 

 

 

unit to properly perform.

 

 

 

Failure to follow this step

 

 

 

can damage the Pump.

 

 

6.

Test the cleaning capabilities

 

FIGURE M (REAR VIEW)

 

and the run before starting

 

 

your cleaning project, as

 

 

 

 

 

 

explained on page 17, #1. Turn the Power Switch to the “ON” position, it should

 

illuminate. The motor will briefly run when the switch is first turned on to build

 

up pressure and then go to standby until the trigger is squeezed.

 

NOTE: The Motor (3A) does not run continuously, but only when the Trigger is

 

squeezed. If a humming noise persists while the motor is on standby, briefly

 

discharge the nozzle in a safe direction.

 

7.Point the Nozzle in a safe direction. Then, disengage the Safety and squeeze the Trigger (21C). Switch the unit’s switch to the OFF position whenever the gun is not in use. (See Figures I and M.) Clean the area, following the tips contained in the Operating Tips section.

8.When finished spraying, fully engage the Trigger Safety Lock (26C), turn the Power Switch to its “OFF” position, and turn off the water supply. (See Figure M.)

SKU 02433

For technical questions, please call 1-800-444-3353;

PAGE 15

Troubleshooting section at end of manual.

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Pressure Washer For technical questions or replacement parts, please callContents Work Area SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetyTool USE and Care ServiceDo not handle the Gfci Plug 11A with wet hands Specific Safety RulesSKU Grounded Tools Tools with Three Prong Plugs GroundingSymbology Extension CordsSee Table a Rear View AssemblyFigure E With a Trigger Safety Lock 26C Controls and SetupControls and Features Pressure Washer features a 3- Prong, Ground Fault CircuitSee Figure L Pattern AdjustmentPressure Adjustment See Figure KSetup Discharge the nozzle in a safe direction OperationIMPORTANT! Prior to Turning on the PressureOperatingtips Become Familiar with Your MachineUSE Proper Pressure Washer Operation Techniques Cleaning Recommendations 3a. For a vertical or sloped surface3b. For a flat surface INSPECTION, MAINTENANCE, and Cleaning Description Qty Parts List a / Assembly Diagram aDescription Qty Parts List B / Assembly Diagram BParts List C / Assembly Diagram C Troubleshooting Water Leaking from Within the HousingPressure Washer Stops Suddenly Troubleshooting Pressure Washer will not StartPressure Washer does not Build Pressure Detergent will not Dispense Clean tip, using the included Tip Cleaning wireSet up the washer as explained on Pressure Changes During USE

2433 specifications

Harbor Freight Tools is widely recognized for providing high-quality, budget-friendly tools for both casual users and professional tradespeople. One notable product in their extensive inventory is the Harbor Freight Tools 2433, a versatile and efficient tool that stands out for its reliability and features.

The Harbor Freight Tools 2433 is primarily known as a compact and powerful tool that caters to a range of tasks from woodworking to automotive repairs. One of its main characteristics is its lightweight design, which allows for easy handling and maneuverability, making it an ideal choice for both small and large projects. Weighing in under 5 pounds, it minimizes user fatigue, promoting extended periods of use without discomfort.

A significant feature of the Harbor Freight Tools 2433 is its motor, which delivers impressive torque and speed, ensuring efficient performance. The tool operates at varying RPMs, allowing users to adjust speed according to the specific task at hand, whether it’s drilling, screwing, or cutting. This flexibility makes it an essential tool in any workshop or home garage.

Another noteworthy aspect of this tool is its ergonomic design. The handle is crafted with comfort in mind, providing a secure grip that enhances control during operation. This focus on user experience is complemented by a safety switch that prevents accidental activation, adding an extra layer of protection during use.

Furthermore, the Harbor Freight Tools 2433 is compatible with a wide range of attachments, quickly transforming into a multi-use tool that serves various functions. Whether you need to switch between drill bits or saw blades, the tool's easy-change mechanism simplifies this process, allowing for quick transitions.

The build quality of the Harbor Freight Tools 2433 is also impressive, using durable materials that withstand the rigors of regular use. Users can expect longevity from this tool, making it a worthwhile investment over time.

In summary, the Harbor Freight Tools 2433 embodies versatility, ease of use, and durability. With its powerful motor, ergonomic design, and adaptability through various attachments, it provides an excellent solution for DIY enthusiasts and professionals alike. Whether you’re tackling small home improvement projects or larger construction tasks, this tool stands ready to assist, highlighting Harbor Freight's commitment to quality and affordability in the tool industry.
Top Page Image Contents