Harbor Freight Tools 2433 manual Cleaning Recommendations, 3a. For a vertical or sloped surface

Page 17

a.Do not release the trigger between sweeps. Release the trigger as few times as possible during use. Interrupted or sporadic spraying will cause the unit to heat up quickly and will increase the need for rest periods.

b.Make sure that all obstacles have been moved and the entire area is ready before starting.

c.For small jobs, try to finish an entire portion of the job before taking a break.

CLEANING RECOMMENDATIONS

1.Clean an inconspicuous test area to help avoid damaging the surface: Always begin with the fan spray at a distance of about 3-5 feet from the surface being cleaned to avoid damaging the surface of the object. Make sure that the test area is clear of people and water prone/delicate objects. If a pressure washing detergent is to be used, apply the detergent to this area as well. After cleaning this area, switch off the pressure washer and inspect the area carefully for any damage or discoloration. If any damage is noted from the pressure setting, use a lighter setting when cleaning the rest of the area. If damage or discoloration is noted from the detergent, do not use it when cleaning.

2.First, pass over the area with a light cleaning, and then more thoroughly clean it.

3a. For a vertical or sloped surface:

a.Wash from the top down.

b.If possible, direct the stream in the same direction as the slope towards a draining area. This will enable better drainage and therefore better cleaning.

3b. For a flat surface:

a.If a thin layer of water accumulates on the surface, periodically use the stream to direct this water towards the drainage.

b.After the major cleaning is done, sweep the surface with the stream to help direct loose debris toward the drainage.

4.If detergent is to be applied: Only use pressure washing detergent; other detergents will clog or damage the pressure washer. Apply the detergent at low pressure, by either using the Brush Wand (34C) or the low pressure setting of the Spray Wand (9C). Allow the detergent several minutes to sit and soak into the work surface; this will improve cleaning efficiency. If the Spray Wand is used, briefly shut off the unit and pull the adjustable nozzle in to switch to high pressure mode and automatically shut off the soap dispenser for rinsing. Make certain to rinse off all detergent completely.

5.Hold the Wash Gun at about a 45° angle and steadily sweep the stream back and forth; if a severe, head-on angle is used, dirt may imbed in the surface being cleaned. Follow a steady, consistent pace during cleaning; this will help prevent stripes or discoloration afterwards. If streaking or uneven cleaning is noted at the end of a project, go over the edges of the streaks with a wide fan pattern to help blend these lighter areas in.

6.If several different surfaces are to be cleaned, be careful not to damage any of the

SKU 02433

For technical questions, please call 1-800-444-3353;

PAGE 17

Troubleshooting section at end of manual.

 

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Pressure Washer For technical questions or replacement parts, please callContents General Safety Rules SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetyTool USE and Care ServiceDo not handle the Gfci Plug 11A with wet hands Specific Safety RulesSKU Grounded Tools Tools with Three Prong Plugs GroundingSee Table a SymbologyExtension Cords Rear View AssemblyFigure E Controls and Features Controls and SetupPressure Washer features a 3- Prong, Ground Fault Circuit With a Trigger Safety Lock 26CPressure Adjustment Pattern AdjustmentSee Figure K See Figure LSetup IMPORTANT! Prior to OperationTurning on the Pressure Discharge the nozzle in a safe directionUSE Proper Pressure Washer Operation Techniques OperatingtipsBecome Familiar with Your Machine 3b. For a flat surface Cleaning Recommendations3a. For a vertical or sloped surface INSPECTION, MAINTENANCE, and Cleaning Description Qty Parts List a / Assembly Diagram aDescription Qty Parts List B / Assembly Diagram BParts List C / Assembly Diagram C Pressure Washer Stops Suddenly TroubleshootingWater Leaking from Within the Housing Pressure Washer does not Build Pressure TroubleshootingPressure Washer will not Start Set up the washer as explained on Clean tip, using the included Tip Cleaning wirePressure Changes During USE Detergent will not Dispense

2433 specifications

Harbor Freight Tools is widely recognized for providing high-quality, budget-friendly tools for both casual users and professional tradespeople. One notable product in their extensive inventory is the Harbor Freight Tools 2433, a versatile and efficient tool that stands out for its reliability and features.

The Harbor Freight Tools 2433 is primarily known as a compact and powerful tool that caters to a range of tasks from woodworking to automotive repairs. One of its main characteristics is its lightweight design, which allows for easy handling and maneuverability, making it an ideal choice for both small and large projects. Weighing in under 5 pounds, it minimizes user fatigue, promoting extended periods of use without discomfort.

A significant feature of the Harbor Freight Tools 2433 is its motor, which delivers impressive torque and speed, ensuring efficient performance. The tool operates at varying RPMs, allowing users to adjust speed according to the specific task at hand, whether it’s drilling, screwing, or cutting. This flexibility makes it an essential tool in any workshop or home garage.

Another noteworthy aspect of this tool is its ergonomic design. The handle is crafted with comfort in mind, providing a secure grip that enhances control during operation. This focus on user experience is complemented by a safety switch that prevents accidental activation, adding an extra layer of protection during use.

Furthermore, the Harbor Freight Tools 2433 is compatible with a wide range of attachments, quickly transforming into a multi-use tool that serves various functions. Whether you need to switch between drill bits or saw blades, the tool's easy-change mechanism simplifies this process, allowing for quick transitions.

The build quality of the Harbor Freight Tools 2433 is also impressive, using durable materials that withstand the rigors of regular use. Users can expect longevity from this tool, making it a worthwhile investment over time.

In summary, the Harbor Freight Tools 2433 embodies versatility, ease of use, and durability. With its powerful motor, ergonomic design, and adaptability through various attachments, it provides an excellent solution for DIY enthusiasts and professionals alike. Whether you’re tackling small home improvement projects or larger construction tasks, this tool stands ready to assist, highlighting Harbor Freight's commitment to quality and affordability in the tool industry.
Top Page Image Contents