Harbor Freight Tools 2433 manual Extension Cords, Symbology, See Table a

Page 9

EXTENSION CORDS

1.Grounded tools require a three wire extension cord.

2.As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. (SeeTable A.)

3.The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord.

WARNING! Do not use 16 or 18 AWG extension cords on this product.

4.When using more than one extension cord to make up the total length, make sure each cord contains at least the minimum wire size required. (See Table A.)

5.If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size.

(See Table A.)

6.If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

7.Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.

Table A

RECOMMENDED MINIMUM WIRE GAUGE FOR POWER CORDS* (120 V)

NAMEPLATE AMPERES

(At Full Load)

POWER CORD LENGTH

 

25

50

OVER 50 FEET

 

Feet

Feet

 

 

 

 

 

 

12.1 - 16.0

14

12

Extension Cords must

 

 

 

16.1 - 20.0

12

10

NOT be used.

 

 

 

 

 

* Based on limiting the line voltage drop to five volts at 150% of the rated amperes.

SYMBOLOGY

Table B

REV 08/04

SKU 02433

For technical questions, please call 1-800-444-3353;

PAGE 9

Troubleshooting section at end of manual.

 

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Pressure Washer For technical questions or replacement parts, please callContents General Safety Rules SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetyTool USE and Care ServiceDo not handle the Gfci Plug 11A with wet hands Specific Safety RulesSKU Grounded Tools Tools with Three Prong Plugs GroundingSymbology Extension CordsSee Table a Rear View AssemblyFigure E Controls and Features Controls and SetupPressure Washer features a 3- Prong, Ground Fault Circuit With a Trigger Safety Lock 26CPressure Adjustment Pattern AdjustmentSee Figure K See Figure LSetup IMPORTANT! Prior to OperationTurning on the Pressure Discharge the nozzle in a safe directionOperatingtips Become Familiar with Your MachineUSE Proper Pressure Washer Operation Techniques Cleaning Recommendations 3a. For a vertical or sloped surface3b. For a flat surface INSPECTION, MAINTENANCE, and Cleaning Description Qty Parts List a / Assembly Diagram aDescription Qty Parts List B / Assembly Diagram BParts List C / Assembly Diagram C Troubleshooting Water Leaking from Within the HousingPressure Washer Stops Suddenly Troubleshooting Pressure Washer will not StartPressure Washer does not Build Pressure Set up the washer as explained on Clean tip, using the included Tip Cleaning wirePressure Changes During USE Detergent will not Dispense

2433 specifications

Harbor Freight Tools is widely recognized for providing high-quality, budget-friendly tools for both casual users and professional tradespeople. One notable product in their extensive inventory is the Harbor Freight Tools 2433, a versatile and efficient tool that stands out for its reliability and features.

The Harbor Freight Tools 2433 is primarily known as a compact and powerful tool that caters to a range of tasks from woodworking to automotive repairs. One of its main characteristics is its lightweight design, which allows for easy handling and maneuverability, making it an ideal choice for both small and large projects. Weighing in under 5 pounds, it minimizes user fatigue, promoting extended periods of use without discomfort.

A significant feature of the Harbor Freight Tools 2433 is its motor, which delivers impressive torque and speed, ensuring efficient performance. The tool operates at varying RPMs, allowing users to adjust speed according to the specific task at hand, whether it’s drilling, screwing, or cutting. This flexibility makes it an essential tool in any workshop or home garage.

Another noteworthy aspect of this tool is its ergonomic design. The handle is crafted with comfort in mind, providing a secure grip that enhances control during operation. This focus on user experience is complemented by a safety switch that prevents accidental activation, adding an extra layer of protection during use.

Furthermore, the Harbor Freight Tools 2433 is compatible with a wide range of attachments, quickly transforming into a multi-use tool that serves various functions. Whether you need to switch between drill bits or saw blades, the tool's easy-change mechanism simplifies this process, allowing for quick transitions.

The build quality of the Harbor Freight Tools 2433 is also impressive, using durable materials that withstand the rigors of regular use. Users can expect longevity from this tool, making it a worthwhile investment over time.

In summary, the Harbor Freight Tools 2433 embodies versatility, ease of use, and durability. With its powerful motor, ergonomic design, and adaptability through various attachments, it provides an excellent solution for DIY enthusiasts and professionals alike. Whether you’re tackling small home improvement projects or larger construction tasks, this tool stands ready to assist, highlighting Harbor Freight's commitment to quality and affordability in the tool industry.
Top Page Image Contents