Harbor Freight Tools 67596 manual Service precautions

Page 6

23.Use the correct equipment for the application. Do not modify the equipment and do not use the equipment for a purpose for which it is not intended.

24.The high pressure water flow can damage the work surface if not used properly. Always test the spray in an open area first.

25.When dispensing detergent, apply the detergent to the cleaning area at low pressure only. Detergent dispensing only works when the spray wand is in the low-pressure position.

26.Injection Hazard. The high pressure water jet produced by this tool can cut skin or cause injury to hands or eyes. Do not

allow spray to strike you and do not spray toward people or animals. Do not spray the tool itself or any electrical source.

27.This Pressure Washer is intended for outdoor residential use only.

28.In case of an emergency during use, immediately release the trigger on the spray handle, turn the engine off and then shut off gas supply to the engine. Do not set the spray handle down without turning off the engine.

Vibration Hazard:

This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury:

1.Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have regular medical check- ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible.

2.Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury.

3.Wear suitable gloves to reduce the vibration effects on the user.

4.Use tools with the lowest vibration when there is a choice between different processes.

5.Include vibration-free periods each day of work.

6.Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work.

7.To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately.

Service precautions

1.Before service, maintenance, or cleaning:

a.Turn the engine switch to its “OFF” position.

Page 6

For technical questions, please call 1-800-444-3353.

SKU 67596

Image 6
Contents For technical questions or replacement parts, please call HP pressure washerContents Set up precautions Save This ManualOperating Precautions Carbon Monoxide Hazard Using an engine indoorsFor technical questions, please call Service precautions Refueling Basic Specifications Set Up InstructionsUnpacking Wide Spray AssemblyLow Pressure Medium SprayIf using detergent Narrow SprayPencil Spray Engine diagram SKU For technical questions, please callOil type Operating InstructionsStarting the Engine Checking Pump Oil LevelFill with oil To hereChecking Fuel Level Break-in Period Equipment Operation Risk of Burns Technical Specifications Maintenance ProceduresServicing Air Filter Element Maintenance CleaningSpark Plug Maintenance Cleaning, Maintenance, Lubrication Schedule Storage After Every 300 Operation HoursTroubleshooting Problem Possible Causes Probable SolutionsUse Engine will not start Troubleshooting Please Read the Following Carefully Parts Lists and Diagrams General Parts ListPart Description Qty General Assembly Diagram Parts List a Pump Part DescriptionAssembly Diagram a Pump Parts List & Diagram B Cylinder Head Description QtyParts List & Diagram C Crankcase Parts List & Diagram D Crankcase Cover Parts List & Diagram E Crankshaft/Piston Parts List & Diagram F Gas Distribution Adjustment System Parts List & Diagram G Starter Subassembly Parts List & Diagram H Diversion Assembly Parts List & Diagram J Carburetor Parts List & Diagram K Flywheel/Coil Assembly Parts List & Diagram M Control System Parts List & Diagram N Air Cleaner Parts List & Diagram P Muffler Parts List & Diagram R Fuel Tank Parts List & Diagram S Carbon Canister Limited 1 year / 90 Day Warranty Emission Control System WarrantyLength of Coverage Model 67596 Pressure Washer Easy Start-up guide Operational Break-in Period