Harbor Freight Tools 67596 manual Basic Specifications, Unpacking, Set Up Instructions

Page 8

Basic Specifications

 

Type

89+ octane unleaded

Fuel

gasoline

 

 

Capacity

0.95 Gallons

 

Type

10W-30 above 32° F

Engine Oil

(SAE)

5W-30 at 32° F or below

 

Capacity

0.63 Quarts

 

 

 

Pump Oil

 

3.75 fl-oz SAE 10W-30

 

Non-detergent

 

 

Engine Speed

3,600 RPM

Water Flow

 

3 GPM Maximum

Maximum Pressure

2,500 PSI

Note: Additional specifications found in the Technical Engine Specifications chart in this manual.

The emission control system for this Generator’s Engine is warranted for standards set by the U.S. Environmental Protection Agency and by the California Air Resources Board (also known as CARB). For warranty information, refer to the last pages of this manual.

At high altitudes, the engine’s carburetor, governor (if so equipped), and any other parts that control the fuel-air ratio will need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage to the engine and any other devices used with this product.

Unpacking

When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.

Set Up Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

WARNING Risk of accidental starting; resulting

in serious personal injury. Turn the Power Switch of the equipment to its “OFF” position, wait for the engine to cool, and unplug the spark plug wire(s) before assembling or making any adjustments to the equipment.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Page 8

For technical questions, please call 1-800-444-3353.

SKU 67596

Image 8
Contents For technical questions or replacement parts, please call HP pressure washerContents Set up precautions Save This ManualOperating Precautions Carbon Monoxide Hazard Using an engine indoorsFor technical questions, please call Service precautions Refueling Unpacking Basic SpecificationsSet Up Instructions Assembly Low PressureWide Spray Medium SprayPencil Spray If using detergentNarrow Spray Engine diagram SKU For technical questions, please callOperating Instructions Starting the EngineOil type Checking Pump Oil LevelChecking Fuel Level Fill with oilTo here Break-in Period Equipment Operation Risk of Burns Servicing Technical SpecificationsMaintenance Procedures Spark Plug Maintenance Air Filter Element MaintenanceCleaning Cleaning, Maintenance, Lubrication Schedule Storage After Every 300 Operation HoursTroubleshooting Problem Possible Causes Probable SolutionsUse Engine will not start Troubleshooting Please Read the Following Carefully Part Description Qty Parts Lists and DiagramsGeneral Parts List General Assembly Diagram Parts List a Pump Part DescriptionAssembly Diagram a Pump Parts List & Diagram B Cylinder Head Description QtyParts List & Diagram C Crankcase Parts List & Diagram D Crankcase Cover Parts List & Diagram E Crankshaft/Piston Parts List & Diagram F Gas Distribution Adjustment System Parts List & Diagram G Starter Subassembly Parts List & Diagram H Diversion Assembly Parts List & Diagram J Carburetor Parts List & Diagram K Flywheel/Coil Assembly Parts List & Diagram M Control System Parts List & Diagram N Air Cleaner Parts List & Diagram P Muffler Parts List & Diagram R Fuel Tank Parts List & Diagram S Carbon Canister Limited 1 year / 90 Day Warranty Emission Control System WarrantyLength of Coverage Model 67596 Pressure Washer Easy Start-up guide Operational Break-in Period