b. Allow the engine to completely cool.
c. Then, remove the spark plug wire(s) from the spark plug(s).
2.Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechanical guards, and heat shields, among other guards.
3.Do not alter or adjust any part of the equipment or its engine that is sealed by the manufacturer or distributor. Only a qualified service technician may adjust parts that may increase or decrease governed engine speed.
4.Wear
5.Keep the high pressure hose connected to the pressure washer and spray Gun while the system is pressurized. Disconnecting the pressure hose while the unit is pressurized is dangerous, and may cause injury.
6.Do not allow the high pressure hose to come in contact with any hot part of the unit. The hose might be damaged, possibly causing it to burst or leak under high pressure.
7.Maintain labels and nameplates on the equipment. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
8.If water is leaking out of the Pressure Washer immediately turn off the unit. Unplug the Pressure Washer,
and discharge all pressure before tightening fittings or having repair work done by a qualified technician.
9.When the engine is running, do not allow the Pressure Washer to remain idle for more than two minutes. If allowed to remain idle, the water in the unit will heat up, possibly causing damage to the Pressure Washer.
10.Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained. Do not attempt any service or maintenance procedures not explained in this manual or any procedures that you are uncertain about your ability to perform safely or correctly.
11.Store equipment out of the reach of children.
12.Follow scheduled engine and equipment maintenance.
Refueling:
1.Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling.
2.Do not refill the fuel tank while the engine is running or hot.
3.Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.
4.Refuel in a
Save these instructions.
SKU 67596 | For technical questions, please call | Page 7 |