Generac 1418-0 manual Know Your Pressure Washer, Quick-Connect Fitting

Page 4

Generac Portable Products 3,000 PSI High Pressure Washer

KNOW YOUR PRESSURE WASHER

Read this owner’s manual and safety rules before operating your high pressure washer.

Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

Pressure Control Knob

Nozzle Extension With

Gas Tank

Quick-Connect Fitting

 

Water Inlet

Dual Element

 

 

Air Filter

Pump Inset View

Recoil Starter

 

Quick-Connect Nozzles

 

 

Oil Fill Cap

Spray Gun

 

High Pressure Hose

 

 

High Pressure Outlet With

Pump equipped with

Quick-Connect Fitting

 

Automatic Cool Down System

Chemical Injection Siphon/Filter

Automatic Cool Down System — Cycles water through pump when water reaches 140°-145°F.Warm water will discharge from pump onto ground. This system prevents internal pump damage.

Chemical Injection Siphon/Filter — Insert filter and hose

into chemical container.

Dual Element Air Filter — Filter limits the amount of dirt and dust that gets in the engine.

Gas Tank — Fill tank with regular unleaded gasoline. Always leave room for fuel expansion.

High Pressure Hose — Connect one end to the water pump and the other end to the spray gun.

High Pressure Outlet With Quick-Connect Fitting

Connection for high pressure hose.

Nozzle Extension With Quick–Connect Fitting — You must attach this to the spray gun to use the nozzles. The quick–connect fitting lets you quickly exchange the four provided nozzles to adjust the spray pattern of the high pressure spray and apply chemical.

Oil Fill Cap — Fill engine with oil here.

Pressure Control Knob — Varies the pressure of the high pressure spray.

Pump — Develops high pressure.

Quick-Connect Nozzles - Chemical injection, 0°, 15°, 25°, 40°: for various cleaning applications.

Recoil Starter — Use for starting the engine manually.

Spray Gun — Controls the application of water onto cleaning surface with trigger device. Includes safety latch.

Water Inlet — Connect garden hose here.

4

Image 4
Contents 3000PSI Equipment Description Safety RulesCustomer Responsibilities Generac Portable Products 3,000 PSI High Pressure Washer Know Your Pressure Washer Quick-Connect FittingRemove Pressure Washer from Carton Carton ContentsPreparing Pressure Washer for USE Add Engine Oil Connect Hose and Water Supply to Pump Add GasolineHOW to USE Your Pressure Washer Checklist Before Starting EngineHow to Start Your Engine How to Use the Nozzles How to Stop Your Pressure WasherFollow these instructions to change nozzles Cleaning and Applying Chemical Low PressureHigh Pressure To apply detergent follow these stepsSpecifications Pressure Washer RinsingAutomatic Cool Down System Water SupplyGeneral Maintenance Recommendations Pressure Washer MaintenanceNozzle Maintenance Check In-Line FilterPurge Pump of Air Contaminants To remove air from the pump, follow these stepsEngine Maintenance Preparing the Unit for Storage Ring MaintenanceStoring the Engine To remove a worn or damaged o-ringGenerac Portable Products 3,000 PSI High Pressure Washer Troubleshooting Exploded View Unit Parts List Unit Qty DescriptionExploded View Pump Parts List Pump Spacer PlateWarranty Schedules Limited Pressure Washer WarrantiesGenerac Portable Products Engine