Generac Portable Products 3,000 PSI High Pressure Washer
WARNING! Read entire owner’s manual before you attempt to assemble or operate your new pressure washer.
REMOVE PRESSURE
WASHER FROM
CARTON
•Remove the high pressure hose and parts box included with pressure washer.
•Slice two corners at the end of carton from top to bottom so the panel can be folded down flat, then remove all packing material.
•Roll pressure washer out of carton.
CARTON CONTENTS
Items in the carton include:
•Main Unit
•High Pressure Hose
•Handle Assembly
•Parts Box, includes:
•(2) 20oz oil bottles
•Safety goggles
•Nozzle cleaning kit
•Bag Containing 5
•
•Owner’s manual
•Engine manual
•Engine warranty
•Emissions control system warranty
•Spray gun
•Nozzle extension with
•Parts Bag (containing hardware to attach handle to pressure washer)
•4 Carriage Bolts
•4 Flange Nuts
If any of the above parts are missing or damaged, call the pressure washer helpline at
PREPARING PRESSURE WASHER FOR USE
If you have any problems with the assembly of your pressure washer or if parts are missing or damaged, call the pressure washer helpline at
To prepare your pressure washer for operation, you will need to perform these tasks:
•Fill out and send in the registration card for a valid warranty.
•Attach the handle to the main unit.
•Add oil to the engine.
•Add fuel to the fuel tank.
•Connect high pressure hose to spray gun and pump.
•Connect the water supply to the pump.
•Connect nozzle extension to gun.
•Select and install desired nozzle.
Attach Handle to the Pressure Washer
Use either a 13mm wrench or adjustable wrench to attach the handle to the pressure washer.
To attach handle to the pressure washer:
•Slowly tip the pressure washer forward and let it gently rest on the front bumper.
•Align the holes on the handle with the holes on the base.
•Insert the carriage bolts provided to hold the handle in place (Figure 1).
Figure 1 — Attach Handle to Pressure Washer
5