Graco Inc 3035, 308-501 Installation, Check for Shipping Damage, Set Up, Connect to Water Supply

Page 5

INSTALLATION

HIGH

PRESSURE HOSE

HOSE RACK

CONNECTION

INLET WATER CONNECTION 3/4” GARDEN HOSE

Figure 1

TEE HANDLE (3040 ONLY)

SPRAY

GUN

SPRAY

HOSE

Check for Shipping Damage

The unit should be checked for any damage that may have occurred in shipping. Any damage should be noted and the carrier notified immediately.

Set Up

If you are using a downstream chemical injector, install it between the pump unloader and the high pressure hose, using the quick couplers provided.

Connect the high pressure hose between the pump outlet and the gun inlet. Both of these connections are made with quick couplers.

CAUTION

Up to 100 ft (30 m) of high pressure hose may be used. Longer hoses may af fect sprayer performance, and chemical injector performance, if used.

Install the appropriate spray tip on the wand. See Installing and Changing Spray T ips. If you are using a sandblaster kit, see its separate manual for installation instructions.

Connect to Water Supply

CAUTION

Before attaching to the water supply , check your local plumbing code regarding cross– connection to the water supply . A backflow preventer P/N 801–133 is available to prevent backflow of contaminated water into the fresh water supply. Install it upstream from the pump.

If inlet water pressure is over 60 psi (4.1 bar) a regulating water valve P/N 800–258 must be installed at the garden hose connection.

Do not exceed 160 _￿ F (70_￿ C) inlet water temperature.

Connect a hose with at least a 3/4 inch (19 mm) ID from the water supply to the unit’s 3/4 inch garden hose inlet. The supply hose should not be more than 50 ft (15 m) long.

NOTE: The water source at the unit

must have a

minimum flow rate equal to that of the unit (see Technical Data, inside back cover).

￿08-￿89￿ ￿ ￿ ￿ ￿ 5

Image 5
Contents INSTRUCTIONS-PARTS List Pressure Relief Procedure General SafetySpray Gun Safety Devices Medical TreatmentEquipment Misuse Hazard Hose SafetyFuel and Emission Hazards System PressureTerms Moving Parts HazardSet Up InstallationCheck for Shipping Damage Connect to Water SupplyStartup Installing and Changing Spray Tips Trigger Safety LatchSHUTDOWN, Flushing and Storage MaintenanceProblem Troubleshooting ChartParts Drawing 800-062 & 800-063 Hydra-Cleanr2245 Pressure WasherPart Description QTY Parts ListHydra-Cleanr3035 Pressure Washer 801-003 BELT, Drive 801-539 Hydra-Cleanr3040 Pressure Washer 801-285 BELT, Drive 801-541 Pump Assembly, 2200 psi 800-327 Pump Assembly, 3000 psi Ring Valves Pump ServicePumping Section Servicing the PlungersServicing the V-Packings AccessoriesTechnical Data Graco INC. P.O. BOX 1441 MINNEAPOLIS, MN Graco Warranty

2245, 3035, 800-335, 800-065, 800-062 specifications

Graco Inc. has made significant strides in the manufacturing of fluid handling systems and equipment, positioning itself as a leader in the industry. Among their well-regarded products are the models 800-062, 308-501, 800-065, 800-335, and 3035. Each of these models comes with unique features and technologies that cater to various industrial applications.

The Graco 800-062 model is known for its reliability and efficiency in fluid transfer applications. It features a durable construction that withstands tough job site conditions. This model is equipped with advanced pneumatic technology, allowing for controlled fluid dispensing, which minimizes waste and enhances precision. Graco's attention to detail in ergonomics also enables operators to handle the device with comfort, reducing user fatigue during prolonged use.

The 308-501 model excels in its versatility, providing multiple output options to meet different operational needs. Its modular design allows for easy upgrades and maintenance. A standout characteristic of this model is its integrated filtration system, which ensures that the fluid remains contaminant-free, ultimately improving the quality of the application.

Moving on to the 800-065 model, this equipment is particularly known for its high flow rates and heavy-duty performance. Ideal for high-volume applications, it combines advanced hydraulic technology with a robust build, making it suitable for both indoor and outdoor environments. The automatic pressure regulation feature enhances its operational safety and extends the service life of the equipment.

The Graco 800-335 model stands out for its compact design, making it a perfect choice for workspaces with limited space. Despite its small footprint, it doesn't compromise on performance. The user-friendly interface allows for easy adjustments, and the model is equipped with low noise technology, making it ideal for noise-sensitive environments.

Finally, the Graco 3035 model is designed for precision and accuracy in fluid dispensing processes. It features intuitive controls and a state-of-the-art monitoring system, allowing for real-time feedback on fluid levels and pressure. An automatic shut-off feature ensures safety and prevents overfilling or accidental spills.

In summary, Graco Inc.'s models 800-062, 308-501, 800-065, 800-335, and 3035 represent a blend of innovation, durability, and user-centered design, making them vital tools in various industrial applications ranging from construction to manufacturing. These models not only enhance productivity but also ensure optimal operational safety, meeting the demands of a rapidly evolving industry.